You are reading a single comment by @Carabo and its replies. Click here to read the full conversation.
  • Fork all done now, so could complete assembly. Put on a little less slave wheelset on (Mavic ceramic SUP rims, shimano 600 hubs) for now.

    Took some photos but they turned out shit so here's a write-up of the work done on the forks;
    -sand off logos (600grit then 1200grit)
    -apply black fade near fork crown (used duplicolor cans)
    -apply logos (had gotten original time logos from ebay long ago)
    -apply a couple of layers of clearcoat

    Only needs some finetuning of brakes and shifters before taking it out this weekend :)

About

Avatar for Carabo @Carabo started