For Sale: Thomson, 3T, Profile Racing, OT camera/photo etc

Dolan Track Champion frame, 52cm - DAMAGED, £50?
This frame hasn't been crashed but has developed a large crack around the BB shell on the drive side, and a smaller one on the non drive side through normal usage. Sadly its outside of warranty. In its current state it is not safe for use on track or road, but should be fine for rollers/turbo use. There is also a small crack by the seat clamp which has been there since I purchased it, and hasn't caused any issue. Otherwise the frame is fine, with only cosmetic marks. Sale is for frame and FSA headset in good condition.

3T Funda fork, 172mm steerer, £70
Great quality straight blade full carbon fork as pictured above. Lovely fork - light, stiff and comfy. Steerer is cut to 172mm so is for short headtubes only! To give you a rough idea, I had this on the Dolan above, which has a 107mm headtube, integrated headset and allowed for 20mm of spacer with a thomson stem. Its in great condition with only a couple of small marks to the paint as photographed below. Weight is 327g with the steerer at this length, will do a shot on the scales if you really care. I'll pop the crown race off at work tomorrow. Takes a normal carbon fork expander.

700x32c Schwalbe Marathon tyre, £15
Super hard wearing tyre with some of the best puncture protection available. I had this on the back of a trick build I had very briefly, so it really didn't get much use at all. Less than 100 miles on it I'd guess, you could pretty much pass it off as new - I've heard you can get up to 5000 miles out of these. No picture atm, sorry.

Shimano Tiagra brake calliper, short drop, £10
Good quality Shimano brake calliper in silver, clean and in good working condition and next to no cosmetic wear. Suits most road forks, but not ones with larger tyre/mudguard clearances. I have a short recessed bolt attached the moment but might be able to swap it out for a longer one from work should you need it.

Tektro RL721 crosstop levers, 31.8, £10
These levers will fit onto oversize drops right up to the stem clamp. You can use them inline as crosstops with brake hoods/STIs (good for cyclocross) or as a standalone brake lever. I have been using the left hand one for exactly this, the right hand lever is unused. 1 bolt fixing with hinged clamp so super easy to remove - perfect for riding to the track.

Single aero brake lever, £5
unbranded, single aero brake lever for bullhorns/pursuit bars. Doesn't look fancy but does the job well.

Carbon fork expander, £5
Basic M-Part fork expander, works with a single bolt that tensions the headset and expanders the device as the same time. 1 1/8 carbon (effect?) topcap included.

16T track sprocket, Coffee
Came free with a set of wheels from Varno. New and unused.

Canon EF 17-40L f4 lens,** £350**
A fantastic, professional quality lens for Canon users. Makes for a good normal zoom on a crop sensor, or an outstanding wide zoom on a full frame body. This has been in my bag longer than any other piece of Canon kit as it really is an excellent lens. Check some reviews if you've any doubt.
This lens has some scratches and wear to the body as can be expected. When I first bought it, it had a few small marks on the front element - I bought it on the premise that this would not impact the image quality, and it has not. All the digital work on my website was shot with this lens. I'm happy to send some full res crops to give you an idea, or alternatively come and try it out for yourself and you can take a look at the results.
Comes with rear cap and hood, but no lens cap. Normally these sell for around £450, but because of the cosmetic marks to the body and lens, I'll sell for £350.

Nike messenger bag,** £10 SOLD**
Thomson X4 stem, 100mm, 0º, 31.8 clamp** £35 SOLD**
3T Ergonova Pro bars, 42cm, £35 SOLD
Profile Racing crankset,BB** £70 SOLD**

Collection from Stoke Newington, or postage at extra cost. I'll have a few more things listed up here in the next few days - Canon 5D, 3T Funda forks, stems, brake levers, odd tyres, other camera stuff and possibly an Aende frame.

dibs thomson

seconds on the stem for chocolateboywonder

dibs on the bars, been looking for a pair of these second hand, same size, perfect timing!

2nd dibs bars

fuck - 3rd dibs bars. As if that's going to happen!

Dan, I've got a spare set now if you want them- came off my Langster when I swapped to Rotundo.

44cm c-c, which means 42cm c-c on the hoods.

Potentially interested in the Canon L Lens - will get back to you later today

4th dibs? i'll take the bars and stem together if the others don't. Can collect on sunday.

Did the stem go?

Dan, I've got a spare set now if you want them- came off my Langster when I swapped to Rotundo.

44cm c-c, which means 42cm c-c on the hoods.

bang - I'm in. PM coming your way - I am in South London this weekend too.

If you don't take them.. ;)

just picked up the bars, sorry chaps.

Thanks for meeting up dan!

Quick update - as per above Sam has the bars. Only amey and tumthelove have PMed me about the stem so far, so they're taking priority, though the stem is provisionally sold at the moment. Everything else available, and I'll be listing some more stuff later today if things go to plan.

Dammit - maybe contact wharry as well, he PMed me about the bars so might also be interested.

Aserota - get in touch, I'm a bit tied up during the day this weekend but have the evenings free if you want to come and take a look.

Hi Danns,

I'm going to leave the lens until I get a FF body; the Tamron 17-50 would be a better suit for now.

No problem - I'll be listing a 5D mk1 body & accessories/CF card in the next few days for £400 if that takes your interest?

If you don't take them.. ;)

back off! :D

I've some 42 ergonovas in my toolbox. Stripped of logos though. If someone wants. PM me.

Can you drop me an email (aserota@gmail.com) or PM with the full details - it's tempting!

I've some 42 ergonovas in my toolbox. Stripped of logos though. If someone wants. PM me.

I want the logos - brand whore innit

PM'd about cranks. Ta

I want the logos - brand whore innit

Tipex.

Thanks for the cranks.

Stem still available?

Stem has gone to Amey who dibsed and contacted me first. Sorry to everyone else who made offers.
I've added a few more small things today, hopefully I will get the Aende up sometime next week - really beautiful frame that deserves a better home, I haven't ridden it in months.