You are reading a single comment by @OldSkoolRacer and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@OldSkoolRacer
OK so I bought this as a pub bike some months ago but it is completely too small for me so it needs to go.
I don't actually know too much about it apart from it's a Claud Butler aluminium frame, 1/1/8" threadless headset. I basically replaced everything apart from the frame/seatpost/saddle with new parts as the original bike was in a very tatty state indeed. New parts include;
V-brakes (+cables & levers)
Suspension forks (80mm travel, adjustable)
Bars & stem
Front & rear wheels (rear is for a screw on freewheel)
Michellin "coutry mud" tyres 2.0 wide, loads of tread.
Bike is currently setup with a 44 front chainring on converted road triple cranks and an 18T BMX freewheel on the back and I'm using the old rear mech as a chain tensioner which works spot on.
The frame is small, would likely suit someone 5"4ish but I can measure dimensions if there's any interest.
Asking £100.