You are reading a single comment by @phil88 and its replies. Click here to read the full conversation.
  • Been a while since Ive updated this...

    Got the frame in the post and was in ok nick. But had a few problems, firstly the stem was seized which ended up with me hacksawing it out

    Next thing to get out was the bottom bracket. but that was siezed too, so ended up with me hacksawing out the bottom bracket

    Trying to get the other shell of the bottom bracket I manage to tear the driveside chainstay. with the edge of the vice.

    it kinda put a damner on the project while I looked at finding somewhere to get it fixed. Having a look around I heard about oak cycles which is only a 5min cycle from my work which was perfect.

    I went done and met with Ryan, he has a stash of old 531 which was perfect. and did an amazing job on getting it to tie in with the look and feel of the existing framework

    Ive nearly got all the components for the build so will do another post with all the bits

    Phil

About

Avatar for phil88 @phil88 started