You are reading a single comment by @absurdbird and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@absurdbird
If you're sticking up glass and it has a painted back why do you need to do anything to the wall?
Make a template from 4mm MDF with all the cut outs for tbe sockets in the right place get the glass cut and toughened and painted (Kingsland Glass) and fix it over the shitty wall.
Seal the wall first with PVA.
If you are going to flatten the wall Carlite bonding would be fine.
Make sure you seal the wall - 4:1 water/PVA
Put the bonding on pretty wet and use a straight edge to flatten it out. You can trowel it as it starts to harden and get a good finish if you want.