For Sale: Campagnolo groupset bits, 531 frame, brakes and more

Daytona Chainset, great condition (save for rub mark on drive side logo) original rings 53/39 172.5mm square taper £SOLD

Campy Xenon Levers - 10 speed £SOLD
Campy Xenon rear mech - 10 speed £SOLD
Miche Performance brakes - near mint - SOLD
Campy Veloce front mech - 10 speed braze-on SOLD
Campy Centaur BB - Italian thread SOLD

Levers, brakes and mechs are in superb condition - levers are pretty much mint. BB has installation marks but there's no play in the bearings and it spins smooth.

Cinelli Vai alu bars – 42cm, ergo bend, mid drop and reach - £12

Kalloy Uno seat post - 26.8mm x 400mm SOLD
Stem – 85mm - £15
Brand New Campagnolo Band-on front mech adapter 32mm £11
Campagnolo Daytona front mech band on 32mm 10spd £15

Seat post has usual adjustment marks/scratches but generally pretty good. Stem - been told it’s Cinelli but no markings. Clean and pretty though (no dodgy casting joins etc). Front mech in great condition.

Miche Team Evo Max chainset with BB– Chainset nice clean condition minimal wear. BB has seen better days but still spins. English thread. £50

Reynolds 531 Frame. 60cm with tange headset and really nice chromed fork. Apparently this used to be an Emperor Sport before it was recoated by Armortex in pearl white. Paint in good condition. BB English thread. Heatset spins freely, all barrel adjusters and seat pin present. Nice frame, just too big for me! £100 inc headset and fork

Velo Turbo style saddle. Really good nick, suede style cover - £15

Also:

ITM Stem 120mm anodised black. "M J Sharp" etched into the side. Pretty decent condition, few chips and insertion marks. single bolt under clamp and original rubber shim - SOLD

Matching ITM Italia Pro traditional bend bars. 42cm, cable routing on front. Anodised a really really deep smokey blue. Nice looking bars, few chips and installation marks - £17

Brooks leather bar tape - I know, might sound like new money for old rope as it's used but they're plenty long enough to rewrap bars (came off 42cm bars and was wrapped pretty close to the stem). Plus it's leather so only gets better with age right?! - £SOLD

I work central and live Mile End way so am happy for collection/meeting somewhere within reason. Will also post at extra cost. And of course open to offers!

PM for more photos/questions. Cheers!

How much on the frame?

Oh Yeah, good point! Sorry. Looking for £100 inc fork and headset

Oh fucking hell, this is what I have been looking for. 60cm 531.... but I can't, I need to get the bike up and running with the frame it has got first. Will prob regret not getting it, and will subsequently never find one. But really, money....

Anyhow.... just out of curiosity, what is that sort of curly looking thing on the frame where the front mech would hang?

It's the brazed on mech hanger (as opposed to a band on type) where the front mech screws. Gotta say I'd be keeping it if it fitted me:-)

Oh oh oh! is the Centaur BB 111mm? If so dibs dibs dibs please. I'm in Bow right now. Very close to Mile End.
Thanks.

^^ well sure, and it does fit me. I have a white frame now, but it's 27" wheel specific so needing long drop brakes. Want to get a tighter frame, and this does look good. But really, I should get what I have built and play with it a bit first. If I like road cycling then maybe I will look to smarten up.... but for now. No.

Yip, BB is 111mm. Have PM'd ya

Fair do's Andrew. Pretty sure you'll get hooked on road cycling though, 27" wheels or not!

Just replied by long text. Got excited. Should have just PMed.
Cheers.

Not 27" wheels. 700s in a 27" frame, thus the long reach brakes.

I am a cyclist of yore, but did not really do road stuff until I did the DD this year on this (http://i1302.photobucket.com/albums/...7-01063649.jpg) - single speed mountain bike - ten hours give or take. Next year I want to go back and own it - eight hours or something. So I thought I would start with an old bike... which is what I got.

And like I say, need to get it running and get out on it before I spend more time fixing it up!!

Sorry, have hijacked thread... I will go now.

nice, good work!

no worries man, it's all good.

Dibs braze-on mech, PM follows

How does 20 sound for the 85mm stem & leather tape?

Thanks Dude. Should be good.
Glad you liked Pinarello (he's named after himself) and good luck with the Merckx.
Cheers.

Dibs 26.8mm post for a mate

Aaaand... undibs

Thanks to NorthLondon and Green Wheels over there, pleasure doing business.

Seskin you have PM.

Are the miche brakes a pair?

Yep, priced for the pair

Perfect, Dibs.

And the black ITM Stem....

Really sorry Gordo, just been beaten to it by Mode.

Brakes and Seat post provisionally sold.