You are reading a single comment by @Jay75 and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Jay75
They are "peened" in, a good method of getting them out is to use a metal punch to carefully knock it out, use a piece of wood with a hole drilled out as a support and for the pin to fall into. If done carefully you can reuse the pin, when putting it back in use the punch to re peen it. Or file the "peened" end around (not flat as you might be able to re use if you just take a little off the sides) and just knock out, then buy the replacement pin from campy or look around for something similiar (either your local hobby shop or wickes have pretty good selections). hope this helps