You are reading a single comment by @dubkev and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@dubkev
Been meaning for ages to take some photos of mine in case it ever gets nicked.
Touch wood etc.
Medium Pompetmine frame
Kona P2 forks with an IS disc caliper mount welded on and an eyelet for the rotor guard (currently a bit mashed up and in need of attention)
shimano deore hub & a Rigida DP18 rim on the front wheel with a shimano centre lock style rotor
rear is a Surly single speed hub with standard bolt-on disc brake mount on the other side, Rigida DP18 rim
Avid BB7 (long pull MTB) calipers on both front and rear
cranks are Onza T-Bird 24t with a bashguard
shimano freewheel is 17t so the gearing is quite low compared to others
brake lever is a dual pull modified deore lever
cheapest shimano SPD pedals. cant remember the model number.
Drive side
https://lh4.googleusercontent.com/-hjEtFllUtQ4/UI1_oMqyn_I/AAAAAAAAA3s/al_5Qs6y0gs/s1440/2012-10-28-578.jpg
Non drive side
https://lh5.googleusercontent.com/-ZBRUyZK-fF4/UI19u25IkyI/AAAAAAAAA28/4PGAFlBB9lI/s1440/2012-10-28-570.jpg
Front brake setup
https://lh5.googleusercontent.com/-KyCeLLIIpVg/UI19wx8guqI/AAAAAAAAA3M/bkrau9bysA4/s1440/2012-10-28-572.jpg
Rear setup
https://lh4.googleusercontent.com/-D3EcmSN1c1Y/UI1_oInmSDI/AAAAAAAAA3o/F5pJBZbvuPY/s1440/2012-10-28-575.jpg
Cockpit
https://lh4.googleusercontent.com/-8R5SjWzIchg/UI19xC76GGI/AAAAAAAAA3U/DZ34K5ukigg/s1440/2012-10-28-573.jpg
Might drop the bars down a spacer or two, or maybe flip the stem around, just to experiment.