You are reading a single comment by @JB and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@JB
Kinda confused. The spacing on the front hub is fine. The rear - not so much. It's almost as if the hub has spacers on it? Sorry for shitty laptop camera, but it is the shiny bit on the inside of the nut and the outside of the threads.
These spacers are causing the spacing to be too large and the wheel won't fit on by about 4mm. Don't want to force it on.
Does anyone know if it's possible/how I'd go about removing them?
Just to confirm, the rear spacing is standard 120mm.