You are reading a single comment by @Mikenetic and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Mikenetic
I’m having a bit of a parts clear out, and this lot is up for sale as a group. I’d rather not split it at the moment. It would make a decent groupset to stick on a commuter/winter hack.
Details are:
Shimano 105 ST-5600 10 speed shifters. The left-hand shifter is the original 5600 model, not the later 5601, which means it works with both double and triple chainsets. I used it with a double. They have light wear marks, but are overall in very good condition.
Cable inners and outers are included, these have been cut to fit, but you might be able to use them.
Shimano 105 5600 rear derailleur. Has some cosmetic surface scrapes, works fine.
Shimano 105 5600 front derailleur, double chainring. 31.8mm band-on, I can supply with shims for 28.6mm seat tubes.
Shimano 105 12-27 10 speed cassette.
KMC 10-speed chain with Missing Link chain release.
Tektro R740 calipers. Short reach, dual pivot, came off a Specialized Roubaix. Pads are in decent shape. I’ll supply a pack of hex bolts so you can match different crown thickness with the front brake.
FSA Gossamer chainset, compact 50-34, 172.5mm length. Plenty of life in the chain rings, heel rub marks on the cranks, comes complete with the preload bolt.
FSA Mexa Exo external BB, British Threaded. The bearings in the BB are running a bit rough, I think with the right tools you can get the actual cartridge bearings out of the cups to replace them if you want. The BB works, but the bearings have definitely seen better days.
Oh and some bar tape – I’ve carefully unwrapped it, and as I use old-school figure of eight wrapping around the shifters you might find there’s enough length to reuse it.
Now Sold
Thanks