You are reading a single comment by @ChainBreaker and its replies. Click here to read the full conversation.
  • I believe the vision bar end levers are a weird size and only fit vision bars. You may be able to shim but im not sure. Tester will know.

    Also - needs moar spacers.

    ]Sram s900[/B] carbon tt levers, 99g a pair

    Yes, after you've added the adaptor to fit normal bars the Vision lever ends up heavier than the SRAM TT900. Also, the Vision ones are horrible to use.

    Yes, if you keep the same leg extension, but that's not what limits most people's position, it's hip angle closure. If you use 180mm cranks and lower your saddle 10mm to keep the same leg extension, your foot will rise 20mm closer to the saddle at top dead centre, which has the same hip closing effect as lowering your saddle 20mm without changing cranks. Assuming that lowering the saddle improves CdA, surely you'd be better keeping the 170s and dropping 20mm rather than switching to 180s and only being able to drop 10mm?

    that's the reason why i kept my **tt900 **lever instead of changing to the vision lever

    So the Visions are out.

    And there is a resounding yes to s900

    Is this the best/weight?
    Is there lighter but just as good?

About