You are reading a single comment by @wvm and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@wvm
I've drilled a fair few holes into tiles over the years and all the above is spot on. Try to avoid drilling too close to the edge of the tiles if you can. You'll probably have to put a fair bit of pressure on the drill initially to start the cut into the glaze but, once through, it's a breeze and just needs light pressure and a steady speed.