A change of commute has forced my reluctant sale of my Leader, just to fund another bike. For sale is my Leader 725TR 55cm with 105 carbon fork, full bike with no wheels, I will be using the rims and spokes for the new bike. I
Spec is as follows:
Dura Ace Cog + Lockring, Sram PC01 track chain and Sugino Crankset. All installed from new and the chain is at 0.35mm of wear which is nothing. So the drivetrain is super smooth, always cleaned and degreased then re-lubed if i got caught out in the rain at some point.
Shimano sealed BB running super smooth, FSA Integrated Headset, Airwing bullhorns, Bar end brake lever connected to a blank black shimano calliper with new cable + outer + bar-tape + pads ( brakes never used as my commute was flat) Welgo magnesium pedals and restrap horizontal straps.
when I built this bike I faced + chased the BB shell, faced the headset and the crown race area in my workshop. All components installed with grease , for the BB anti seize and for the tracknuts a mild locktite compound was used.
I will sell the hubs with the bike for £40 extra. Used nearly 12 times for around 7 miles each ride. Bearings super smooth and clean.
Get in-touch if you are interested, I am based in west yorkshire and can deliver within a 10 mile radius of Hebden Bridge. I don't drive so I would prefer if you can pick it up, or you can arrange your own courier to collect the bike.
Hi
A change of commute has forced my reluctant sale of my Leader, just to fund another bike. For sale is my Leader 725TR 55cm with 105 carbon fork, full bike with no wheels, I will be using the rims and spokes for the new bike. I
Spec is as follows:
Dura Ace Cog + Lockring, Sram PC01 track chain and Sugino Crankset. All installed from new and the chain is at 0.35mm of wear which is nothing. So the drivetrain is super smooth, always cleaned and degreased then re-lubed if i got caught out in the rain at some point.
Shimano sealed BB running super smooth, FSA Integrated Headset, Airwing bullhorns, Bar end brake lever connected to a blank black shimano calliper with new cable + outer + bar-tape + pads ( brakes never used as my commute was flat) Welgo magnesium pedals and restrap horizontal straps.
when I built this bike I faced + chased the BB shell, faced the headset and the crown race area in my workshop. All components installed with grease , for the BB anti seize and for the tracknuts a mild locktite compound was used.
I will sell the hubs with the bike for £40 extra. Used nearly 12 times for around 7 miles each ride. Bearings super smooth and clean.
Get in-touch if you are interested, I am based in west yorkshire and can deliver within a 10 mile radius of Hebden Bridge. I don't drive so I would prefer if you can pick it up, or you can arrange your own courier to collect the bike.
P1030681 by cyclerecycle, on Flickr
P1030685 by cyclerecycle, on Flickr
P1030683 by cyclerecycle, on Flickr