You are reading a single comment by @AcidBlow and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@AcidBlow
Front and rear axles are usually different diameters.You'll probably need 9mm track nuts(M9) up front and 10mm(M10) at the rear.Could be the rear axle is 9.5mm,unlikely though.
The front of the brake pad needs to touch the rim just before the back, to avoid squeeling.So, either reposition the pads or sand a tiny bit of rubber from the rear of the pad (about 1mm).
Really special looking bike you got there.