For Sale: Clearout - Technomic, town bars, derailleurs, etc

Clearing out a bunch of stuff as a preparation to moving back to Norway. All prices are excluding postage. All items can be picked up in Berlin, or posted at cost anywhere in the world.

The handlebars might be a bit tricky to ship, but I'll probably figure it out if someone wants them.

1) Derailleurs
https://dl.dropbox.com/u/7143668/Sale%20july/JPEG/Derailleurs.jpg
a) SunTour Cyclone FD, outside chrome is nice - £5
b) Shimano RX100 white/gray FD, good condition, paint pretty scratch free - £5
c) Shimano RX100 white/gray RD, good contidion, jockey/pulley wheels are good, paint has some scratches - £10 (or £12 for the both of them)

2) Shifters and small parts
https://dl.dropbox.com/u/7143668/Sale%20july/JPEG/Shifters%20and%20small%20parts.jpg
a) Rubber bar end plugs - sold magaloof
b) SunTour friction DT shifters - sold magaloof
c) Mafac rear cable hanger and 2x whaddayacallem-transverse cable hangers - £2 or free with any other purchase above £10
d) DT cable guides for high up and down low, shimano (practically NOS) and SunTour, respectively - sold magaloof

3) BBs and bearings
https://dl.dropbox.com/u/7143668/Sale%20july/JPEG/BBs%20and%20bearings.jpg
a) Sugino BB (british), 124 mm spindle. Good condition, races look nice, threads and tapers are fine, was a little creaky before I took it off - £5
b)Campagnolo Mirage BB (british): 111,1 mm asymetric spindle, driverside 21,6, non driverside 18,3 mm, threads and tapers are fine, veeeery smooth - £10
c) Steel sealed hub bearings, brand ZeN, type 6000 2RS GL 8pc (+ 2 used ones to knock in new ones) - £5

4) Freewheel and chainrings
https://dl.dropbox.com/u/7143668/Sale%20july/JPEG/Freewheel%20and%20chainrings.jpg
a) Shimano SG 50 tooth, ok - £5
b) Shimano Biopace, old type 52-42, very good - £15
c) Shimano Biopace, newer type 52-40, good - sold modan
d) Dicta freewheel 18t - £4

5) Stem and seatpost
https://dl.dropbox.com/u/7143668/Sale%20july/JPEG/Seatpost%20and%20stem.jpg
a) Sel.Cof. aero seatpost 27,2, ca. 153 mm from top of min insertion line to middle rails. Nice but some scratches (nothing big above the insertion mark) and a little tape residue - £10 (available again)
b) Nitto Technomic 225x70 mm 25,4 clamp, bought off twiltshire a short while back, needed 26 clamp - sold

6) Complete town bars (as seen on bike in CP)
https://www.lfgss.com/post2994138-63828.html
Think they are SS, but could be chromed. Levers are Shimano BL-R550, excellent return springs and comfortable in use. Comes with DIY cork plugs and the black BBB gel cork tape as seen. Because the bars are steel, the inside diameter is big enough for bar end shifters. 25,4 clamping area. They look good, I liked them, but they didn't agree with my hands. Some wall rash on the levers, a few small scratches on the bars, but thing major, mostly like new - £25

dibs technomic stem

Technomic sold

Dibs 2(a),(b) and (d)
Bar plugs, shifters and cables guides. Will PM-ya now. Cheers!

Dibs
c) Shimano Biopace, newer type 52-42 (have the 42 somewhere), good - £15

Would you post and how long is the Selcof seat post?

Post of course, will measure seatpost sometime today. Will dig out the smaller biopace ring as well.

Ok cheers, I'll wait for the measurement but definitely take those newer Biopace chainrings.

Will probably have some Nitto noodle bars in VGC, 42 cm, up for sale soon, updating thread today or tomorrow.

And some small things added:

7) Seatpost, pump, etc.

a)Black Comp 27,2 seatpost, 200 mm above insertion mark, looks brand new - £5
b) Some pump with handy manometer - £5
c) Shimano canti brakepads, looks like they were used once - £5 for 4
d) Reflector and tire lever - free with any other purchase
e) Multitool - £5
f) Bottle cage - sold