You are reading a single comment by @Dutch_Cheese and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Dutch_Cheese
Originally, an A-frame was also used for a fully equipped Semi Race bike.
Only differences:
For fenders and rear carrier, no clips were screwed on. There were mounted on the dropout eyelets and the chainstay- and brake bridge.
You can use a rear carrier with clip mounting (2 stays fixed to seat stays) , or you can look for a rear carrier that can be mounted to the brake bridge. In that case, you don't need clips.