You are reading a single comment by @AngelD and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@AngelD
^^^^^ It depends if its a carbon/alu/steel steerer?
If its steel or alu, then yes, one of those would work pretty well as long as you take it slow, only tightening it half a turn or so each revolution.
If its carbon, you want a very fine hack saw blade, maybe a junior hack saw (which is what I used), making sure to tape it first with electrical tape or similar so that no fibers get frayed as you cut it which would weaken the steerer.