crown race problem

Posted on
  • my crown race don't fit back into the fork after respray, i have try another fork also, and it also doesnt fit, the crown race is about 1mm too large for the fork seat, can i just buy one tat fits the fork?
    thanks
    kirk

  • Hmmm.. Sounds like a JIS vs ISO problem.. JIS(and sometimes italian) headsets have a crownrace of 27.0mm, while normal ISO threaded ones have a diameter of 26.4mm.. One could coke can shim it, or other options widely available (some kind of cement), but not too advisable.. I'd say, measure the seat of the crown race, get a headset that fits.. Possibly you could get a crown race that would fit the bearings, but you'ld need to test it first..

  • if it's the original crown race and the original fork, i would suggest the fork seating area has been oversprayed. scrape back to bare metal and it should go on.

  • I read this as the race was too big for the fork crown. I think it's been "undersprayed" if there is such a thing

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

crown race problem

Posted by Avatar for kkkkkkkk @kkkkkkkk

Actions