-
• #2
beer can, or just tighten the stem 0.4mm isn't much
-
• #3
tin can
-
• #4
argh! murtle, you are quicker than you look.
-
• #5
sometimes buddy :)
-
• #6
beer can, or just tighten the stem 0.4mm isn't much
+1
-
• #7
I used a tin of stella and cut the logo out with scissors, looks mint
-
• #8
i found that if you cut a strip of tin can out then roll it up and put in stem is easier that wrapping it round bar then trying to put bar and shim into stem together.
-
• #9
Would the same thing apply to steel 25mm bars in a 25.4mm stem? I've tried the strip of can and used a long allen key and it just doesn't seem to grip enough...tends to slip about 10 degrees over the course of a week. I couldn't get sufficient grip without the can either. Nice set of bars so would rather keep them...
Cheers
-
• #10
I have installed my Soma drops (26mm) in a new 'old stock' Cinelli XA stem (26.4mm) using a shim I made from plate brass. It's perfect, and due to the 'trial and error' nature of the experiment I now have spare brass in 0.25mm, 0.3mm and 0.4mm.
-
• #11
25.4mm to 25.8mm seatpost shim cut to size
-
• #12
25.8 to 26 is my issue.
Where is a good place to get cuttable metal in varying thickness? eg brass above
What is best for a bodge - tin can, beer can, alumnium foil baking tray? What is the best style for a bodge?
Using a roll of beer can or tin can I have still got slippage. Is it better to do 180 degrees of roll, and fold back on itself as many times of necessary, and do twice, to get two no. u-shape shims as opposed to one shim that goes all around the bars? Is it worth roughening up the material used to minimise slippage?
-
• #13
Generally I'd still like questions above answered.
But my immediate problem is solved. I was trying to shim a 25.8 mm bar to a 26.4 stem - seems fine with no shim now I have used a 26.0mm stem.
I need to have a strong word with the sneaky old geezer at Ripley Jumble who flogged me a 26.4mm cineli stem in a 26.0mm cinelli stem box.
-
• #14
You can buy brass shim stock on ebay. I made my own 25.4mm to 26mm shim from 0.3mm brass.
Used the Search, but no joy :-(
Trying to fit 26mm bars into a Cinelli 26.4mm stem - is there a shim that fits?
Thx