You are reading a single comment by @BrickMan and its replies. Click here to read the full conversation.
  • in 1st gear on back, its normal for cage to be very close to spokes. BUT you need to make sure its trimmed to ensure it doesn't go into the wheel, and that the cage is parallel to spokes or perpendicular to the ground.

    As for the 5-6-7 skip, thats pretty common, chances are the centurion jockey wheel has a bit too much play in it (so the shift becomes vague) or chain/cassette is on the way out.
    If you ever get a new front mech, hit me up as i'm after that dura ace front mech like that.

    Ok, problem in hand, rubbing when you get to the extents of the rear block, totally normal, if you have friction gears you need to trim them a little when this happens, if you have indexed gears then you have a different problem.

About

Avatar for BrickMan @BrickMan started