Not surprising. You won't have too much trouble with this:
lugged steel
1" threaded
200mm steerer (with approx 35mm thread)
flat or nearly flat crown
for 700c wheels
100mm spacing (obvs)
However, the major problem arises with:
drilled or drillable for a brake
You could either get a road fork, which I'm thinking will have a rake that will upset your geometry (?) or a track fork which is unlikely to be viable in the drilling stakes.
If you were prepared to go a little £££ and a little then a builder could make you something perfect. I think Chas Roberts quoted me about £100 a few years ago for such a fork.
Not surprising. You won't have too much trouble with this:
However, the major problem arises with:
You could either get a road fork, which I'm thinking will have a rake that will upset your geometry (?) or a track fork which is unlikely to be viable in the drilling stakes.
If you were prepared to go a little £££ and a little then a builder could make you something perfect. I think Chas Roberts quoted me about £100 a few years ago for such a fork.