For Sale: Wheel, stems, drop bars, cogs, derailleur, brake levers

I'm having a bit of a clear-out. Parts are in Forest Hill but I can bring them into work (Holborn) on weekdays.

1. Rear wheel
   
   

Black formula flip-flop hub on Sun MZ14 rim, complete with rim tape, tube and Armadillo tyre. This is the wheel that came on my Paddy Wagon and it's been a good and faithful servant over the years. I've replaced the bearings once, and it spins nicely and is completely true. There's some light brake wear on the rim but, as it's been used on the fixed side all the time I've had it, the wear is very light and it's not even concave to the touch. I've only changed it because I bought a new front wheel built with a dynohub and open pro rim, and then had a new rear built to match. Slightly grubby as you'd expect.

How does £40 sound? Too much, you cry. Is £30 more sensible? OK, £25 anyone? [SOLD to Majsterjanek]

1. Sakae/SR anatomic bars and "PRO" quill 120mm stem.
   The bars are fairly scruffy, the stem has not been used (just fitted until I decided it was too tall and went for a lovely NOS Italian stem in Columbus tubing from Planet-X). £15 for both - but would split.
   
   

Stem SOLD to Tellerbones
Bars going bck in shed unless anyone wants them.

1. Hideous H2O stem
   
   

Even the most conscientious mother would have difficulty loving this, but it's got character. I seem to remember that these were sold for about £30 in the olden days. It's got some bashing around the stem cap where I foolishly tapped an allen key with a hammer to loosen the expander bolt without having checked that there was enough room for the allen key to move down without hitting the stem. But the stem cap does a reasonable job of hiding that.

£5 anyone? [sold for a massive £3.50!]

I'll add the other bits shortly!

...and more bits.

1. Derailleur - Deore LX, with very long cage, from a Giant Hybrid. A bit scraped here and there but pivots smoothly. GONE
   

2. Condor-branded crosstop levers, for 26mm bars (hinged clamps). Unused (daughter's bike's bars were too narrow and I gave up on the project). £10 SOLD
   

3. Cogs:
   
   Top left is an unused Dura Ace 3/32" 16T sprocket £10 [SOLD]
   Below that is a worn version of the same. Free [GONE]
   Top right is a shiny lightly used 1/8" 18T cog from BLB £12 [SOLD]
   Below that is a no-name steel 1/8" 19T cog from Edwardes, again lightly used but actually looks better in real life. £10

Brake levers and unused DA cog have been provisionally dibsed. Open to reasonable offers on any of the other parts.

dibs on PRO stem if split
and condor levers

Happy to sell the stem on its own - £10 OK?
I've had one request for the Condor levers already but they may still be available - I'll check and report back.

PM'd!

will take the free 16t cog, meet up in forest, will pm

Update:

Used DA cog now gone

Condor crosstop levers dibsed Tellerbones

BLB cog SOLD

PRO stem may still be available - currently with Tellerbones but it'll probably come back

H2O stem and no-name 19T cog still available

Wheel now reduced to £25 [dibs majsterjanek]

2nd dibs condor levers

Is the rear wheel still available?

Rear wheel now gone - there's not much left now. I'd better go and top up my gold star.