You are reading a single comment by @elllguapo and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@elllguapo
I recently purchased a cross bike with an FSA K- Force crankset (crankset probably 5 years old). From my knowledge it is an integrated external bottom bracket - and my issue is that the left crank has a couple of mm play ("horisontal and vertical") on the spindle.
I have removed the crank a couple of times and replaced - banged with a mallet to ensure that the crank was all the way on when tightening - but cant seem to get it snug. The splines on the bb (from the other crank) look fine - and the crank splines seem ok.
Any suggestions on how I can get this snug? Feels really weird - and I dont want to ruin what are otherwise nice cranks in good shape.
Cheers!