Trade: Corima carbon rear track disc for Dura ace high flange hubs/Dura ace track crankset

I have a Corima carbon disc wheel, which I no longer have any use for. It's in really good condition (apart from one ding), and runs perfectly smooth and true. It has only ever been used on the track, and has been well cared for. It's 120mm oln, and takes a 28" tub.
the ding was caused by dropping a sprocket onto the wheel, but it is tiny, and does not affect the integrity or performance of the wheel in any way. It is just cosmetic.
Here are some photos:

I would be open to cash offers, but would prefer to trade or possibly part exchange for the following items (not bothered with NJS stamps, but would like them to be in at-least reasonable condition):
-High flange Dura ace track hubs (7600s preferably). Ideally 32h, but 36h would be okay too. I might consider a complete wheelset, if the rims are going to suit my build too.
-Dura ace track crankset (preferably 7600). Must be in good condition, and ideally 170mm
-Silver Chris king no-thredset.
-Silver or Black thomson 27.2mm in-line seatpost (needs to be 330mm or longer)
-Any other bits you might have to offer, that I think would suit my project.

Thanks,
Sam

I have a Dura Ace 7710 track crankset, in 165mm.

So, I fail on series and length, but win on groupset name and function.

How tall are you? I'm 188cm and found 165mm to be fine. Noticeable for sure when getting on the track bike from the road/cx bikes with 175's, but you adjust in ~30 seconds.

7710 would work for me, and 165 should be manageable too. I will PM you, but hang on for other offers before committing...