For Sale: Campagnolo Spares

I just took a delivery of a load of Campag stuff which included a lot of spare parts. From complete hubs and hub bodies to dust caps and 2-bolt seatpost parts, there's a lot of random bits which will take a long time to sort through. Before I start sorting it all I thought I'd post a thread just to say that if there's anything in particular you're struggling to find then drop me a PM and I may be able to help.

Most of the smaller spares are NOS but some are used, and they will be priced accordingly.

Current list:

Misc

• Dropout adjuster screws & caps - £6 pair USED BUT GOOD
  
  

Brake Spares

• Super Record Hoods White, look unused but with light storage wear - £32
  https://picasaweb.google.com/wayneblenkin/SRHoodsWhiteNOSUnusedWLightStorageWear32?authuser=0&authkey=Gv1sRgCIme6vmNyqXyGg&feat=directlink
  
• Super Record Hoods White, look unused but with medium storage wear - £30
  https://picasaweb.google.com/wayneblenkin/SRHoodsWhiteNOSUnusedWMediumStorageWear30?authuser=0&authkey=Gv1sRgCIyY5cSMoeKvsAE&feat=directlink
  

• Super Record Hoods White, look lightly used but still excellent - £28
  https://picasaweb.google.com/wayneblenkin/SRHoodsWhiteLightUsedButEX28?authuser=0&authkey=Gv1sRgCNXk2c-wxYKffQ&feat=directlink

• Brake Cable Adjusters each (only have 2) - Monoplanar (flat bottom version) - £8 NOS / £6 Used

• Brake lever clamp bands, complete with nut & washer for NR/SR - £20 pair NOS.

Seatpost Spares

• Campag Steel Seat Binder Bolts (lots of these in all variations) - £12 NOS / £10 Used

• 2-Bolt seatpost upper bridge each £8 NOS / £7 EX / £6 VGC / £5 Good / £4 Fair

• 2-bolt seatpost lower bridge/cradle each £8 NOS / £7 EX / £6 VGC / £5 Good / £4 Fair

• 2-bolt seatpost tubular nut each £2 used

• 2-bolt seatpost bolt to screw into tubular nut £3 used

Pedals & Pedal Spares

• Record Pista Pedals Silver w) Plastic end caps 1970s/80s - Need a re-grease but fine £70 VGC cosmetically
  
• Record Pista Pedals Silver 1960s w) Steel caps - Fine bearings but with rusty bodies - £75
  

• Superleggero Pista Pedals (Black Cage) - One side bearings needs a little attention but fine + Caps are worn through but cosmetically good - £60

• Super Record Alloy Toe-Clips CORTI (Short) 2 x NOS BOXED with fittings - £30 / 1 x Used EX BOXED with fittings £25

• Nuovo Record Steel Toe-Clips CORTI (Short) 1 x NOS BOXED £35 1 x Used VGC Boxed £30

• Campag Steel Pedal Dust Caps - 1 x NOS - £15, 2 x Used but still ok, with some scuffing/scratching - £10 each

Gears

• Bar-end shifters with blue sleeves - £30 each VGC

• Complete Victory D/T Shifters - £25 Used but good.

• Record downtube levers only (Early Version marked VINCENZA ITALY) R/H only - used £9 each

• Record downtube levers only - L/H & R/H - NOS £12 each / USED £8

Record d/t shifter parts (all used):

inner plastic washer for gear lever - £3 pair
outer plastic washer for gear lever - £1 pair
backplate/stop for gear lever - £1 each
chrome outer cover - £2 pair
slot head tension screw £1 pair
D ring tension wingnuts for gear lever £6 pair

• A bunch of various steel & titanium rear mech mounting bolts (best to send a pic of what your after as they're hard to id - £15-25 each, some NOS some used but vgc/ex.

• Jockey Wheels - have a few used ones but I need to work on them to make them complete.

Headsets

• Athena headset (C-Record era with no name) British thread - EX £50
  
• Mystery 90s Campag headset (similar to C-Record in design but with top race has only 2 flat sides like Gran Sport) - Used but good £25
  
• 90s Record Italian Thread headset - MINT installed on show bike only £40
  

• Record/Nuovo Record French Thread - Generally excellent but lower race has some pitting £40

• Super Record Headset Top Nut (British) - £16 EX / £12 OK

• Gran Sport Top Cup (British) - £20 VGC

• Super Record Headset Spacer - £20 MINT

• Record Bearings in Original Case - £10 NOS

Crank/Chainset Spares

• Record / Super Record Crank Dust Cap Covers - £8-20 from rusty to mint.
  
• Flat BREV INT CAMPAGNOLO Crank Dust Cap Covers - £25 VGC
  
• Allen key crank bolts £12 pair VGC/EX
  
  

Bottom Brackets & BB Spares

• Fixed Cups BSA or ITALIAN (Thin wall, non-rifled) - £10 EX / £8 EX surface but with marks/rust on the outside.
  
• Adjustable Cups BSA or ITALIAN - £10 EX / £8 VGC / £6 OK
  
• Adjustable Cup RECORD CON SFERE - £30 OK, with pitting but very rare 1st gen Record)
  
• Lockrings - £4 EX / £3 GOOD
  

• BB/Crank Hex Bolts inc washers - £12 pair

• Pista Axle 68-P-110 - £45 Excellent

• Pista Axle 68-P-120 - £35 Excellent

• Pista Axle 70-P-120 - £35 Excellent

• Strada Axle 68-SS-120 - £18 Good (Slight pitting to one side)

• Strada Axle 70-SS - £20 VGC no pitting

• Strada RECORD CON SFERE Da 3/16 Axle - £35 OK, with pitting but very rare)

Hubs & Hub/Wheel Spares

Nuovo Tipo Hubsets (No skewers) - OLD measurements are approximate for now, but all these can be re-spaced a little.

32/40h Low Flange - Cosmetically: MINT (but with a couple of weathered dust caps) Bearings: EX - 124 OLD - £70 Pair
32h Low Flange - Cosmetically: MINT. Bearings: VGC bearings - 120 OLD -** £60 Pair**
36h Low Flange - Cosmetically: GOOD. Bearings: EX - 124 OLD - £55 Pair
36h Low Flange - Cosmetically: Front GOOD, Rear OK. Bearings: MINT - 122 OLD - £50 Pair
36h Low Flange - Cosmetically: GOOD. Bearings: Front is VGC, Rear has a little bit of pitting - 116 OLD - £45 Pair

36h High Flange - Cosmetically: VGC. Bearings: VGC (Front needs grease) - 120 OLD - £65 Pair SOLD

Nuovo Tipo Skewers

MINT/EX - £35 Pair
VGC/GOOD - £25 Pair

Record Strada Hubs (No skewers)

• 36h Low Flange - Cosmetically: VGC/EX. Bearings: EX - OLD 124-126mm - £75 pair SOLD)
  
• 36h Low Flange - Cosmetically: VGC. Bearings: EX - OLD 120mm - £70 pair
  

• 28h Low Flange - Cosmetically: VGC. Bearings: EX/MINT - OLD 128mm - £75 pair

• 32/40h High Flange - Cosmetically: VGC/EX. Bearings: VGC/EX - OLD 124mm - £95 Pair

• 36h High Flange - Cosmetically: Good. Bearings: VGC - OLD 126-128mm - £80 Pair

• 36h High Flange - Cosmetically: VCG. Bearings: VGC - OLD 122mm - £85 Pair

Record Pista Hubs (No Track Nuts)

• 32/40h Rare old size High Flange - Cosmetically: VGC. Bearings: VGC. OLD 120mm - £125 Pair
  Pics available here: https://picasaweb.google.com/wayneblenkin/CampagRecordPistaHubset?authuser=0&feat=directlink
  
  

Record Quick Release Skewers:

• Early NR/SR Straight lever, pointed Dome with D-Clip - PAIR £45 EX/VGC / £30 Good/Fair
  
• Later NR/SR Curved lever, round ended dome with D-Clip - PAIR £40 EX/VGC / £25 Good/Fair
  
  

Campag Track Nuts (State Front or Rear)

• NOS £20 Pair
  
• EX £18 Pair
  
• GOOD - £15 Pair
  
• FAIR - £12 Pair
  
  

Spares...

• QR axles only, various sizes front & rear - £5 each VGC
  
• Complete QR axles f&r (axle, cones, washers & locknuts) - £20 each EX
  
• Cones (Front or rear) - £10 pair NOS / £8 used but vgc / excellent
  
• Rear hub spacers for QR various sizes - £4 each NOS
  
• Cone locknuts for QR - £3 pair VGC
  
• Inner bearing shells front & rear - £5 each NOS
  
  

QR Skewers & Parts:

• Complete QR skewers, mixed with ok parts & rusty parts - £8 each / £14 pair
  

• Open C Skewer set (rear marked BREV:CAMP, front marked BREV.CAMP) - rear is decent but with some rust, front has rusty lever - £40 pair

• Straight skewer lever - each £6 NOS / £5 EX / £4 GOOD

• Curved skewer lever - each £4 EX / £3 GOOD

• Bolt for lever - each £2 used

• Skewer (rod only) F or R - each £4 used

• End nut (Record/SR Pointed dome with D-Clip) - each £8 EX / £7 VGC / £6 OK

• End nut (NR Round ended dome with D-Clip) - each £8 EX / £7 VGC / £6 OK

• End nut (Nuovo Tipo no clip) - each £8 EX / £7 VGC

Keen on any delta/athena hoods that might be in there.

I would like some

• hoods, hoods, hoods... for early 1990s chorus/athena (indeed) and of course 70s/80s super record, gran sport etc.
  
• brake adjustment barrels for nuovo/record calipers
  
• original blue glass beads for Cobalto brakes
  
  

good luck sorting things, hope there's lots of hard to get goodies

hi
im looking for record hub bearings

I would definitely like a rear sheriff star 36H hub shell and some crank bolt covers

Hi - I'm after a seatpost (frame) bolt and large toe clips for Athena pedals,spare monoplaner cap/bolt (the pointy ones!)..

Hi.

Two bolt seatpost parts would be good - the bolts and the cradles (wobbly bits that clamp the saddle rails).

Roadking.

OK cool. Post everything you want here then I'll check in one batch at the end of the day and PM/post with prices and availability. I'm afraid it's going to be normal campag prices as I never got this stuff particularly cheap, I just couldn't resist buying a batch of Campag goodies! I'll post at the end of the day.

Great! Interested to know what you've got! Cheers! cc

I'm also in for some hoods for '70s record/super record!

Oh, and some jockey wheels for Nuevo Record/Super Record..

Sounds exciting! Any knurled wheels for inside Syncro gear levers, especially 7 speed?

Hoods for some chorus aero brake levers would be ace!

Campag seatpost bolt if you've got any.
And 90's era headset.
Cheers.

Athena headset bearings. And I know tel was looking for Gran Sport and Athena headset lockrings last week.
Nick

70's80s record brake shoes, crank dustcaps, 1 pedal dustcap

defs after: a seatpost bolt and c record era (athena/chorus/record) crankset inc bolts & brake levers & rear derailluer & rear qr skewer
possibly after: c record era seatpost (athena/chorus) & callipers (athena)
ta!

defs after: a seatpost bolt and c record era (athena/chorus/record) crankset inc bolts & brake levers & rear derailluer
possibly after: c record era seatpost (athena/chorus) & callipers (athena)
ta!

Have you decided whether you want the shamal yet J?

Also a 90's era headset would be good.

Dear Wblenkin,

I would really appreciate a 90's chorus rear derailleur bolt (the one which is loose and attaches) the mech to the frame if you happen to find one.

Thank you kindly,

Laurence

Have you decided whether you want the shamal yet J?

still not sure im being a right drama queen about that - if you've got another buyer lined up then cool if not will shoot you an email in next day or so
/hijack

Pair of 8 speed ergo lever hoods.
Maybe 8 speed rear mech.
10 speed hubs.

Athena headset bearings. And I know tel was looking for Gran Sport and Athena headset lockrings last week.
Nick

Thanks fella.

Yes please. Not so much the gransport as I have a tatty one already, but an Athena locknut from the era of having group name engraved on the headset. I also have a complete Athena bottom race and complete Chorus (late sealed bearing type) top race which I'm keen to complete or sell.

any 10 speed brifters?

Hey guys, had a hectic couple of hours in the shop before closing so didn't get round to sorting through for stuff. Will do it first thing in the morning.

Sorry!

If you've got any of those M7 Cable clamp bolts for deltas that would be sweet!