Tool library / tool exchange. Post what you got and where you are

is it the flat side of the one with holes?

the one with the holes. I think this is what I need:

yeah something like that. You could try putting the short end of an allen key in one of the holes and hammering it around.

yeah was thinking about doing that, not sure how it will affect the cup though.. will give it a go tomorrow, thanks!

^ I have a tool for that. Based in Shepherds Bush and work near Paddington.

You can also use the end of needle nosed pliers.

I haz a spoke threader if anyone needs weirdy length spokes cut and threaded.
(south)

Re fucked cleats does anyone in the SE15 area have a drill/dremel/rounded cleat removal tools I could borrow?

Beer in return?

Did Loic sort you out? If not, PM me.

i work in a tech dept in a secondary school in north london but the place is kitted out with absolutely everything. pillar drills, lathes, milling machines, thousands of metric/imperial drills and taps, grinders etc.

if people are really stuck for fixing something, i work in the currency of beer or biscuits. feel free to drop me a pm (live in hackney)

spybot, have you got your cleats sorted? i threaded a bolt on my cleats and managed to re tap it to an M6. I can help if andyp hasnt already

I could use a drill to remove a pedal stuck in my crank arm^
will drop you a PM, after crimbo I reckon?

I could use a drill to remove a pedal stuck in my crank arm^
will drop you a PM, after crimbo I reckon?

yeah let me know if you need a hand. i will have a go at it if i can.

I dont suppose anyone has a crank puller and chain tool I could borrow? Im in Brixton but anywhere relatively close is helpful.

Does anyone have a plane I can borrow? Front door is sticking like a big sticky thing. Feels like the front of the house will fall off whenever anyone goes in and out. Peckham or thereabouts would be easiest.

I dont suppose anyone has a crank puller and chain tool I could borrow? Im in Brixton but anywhere relatively close is helpful.

Yep I have both and I'm in peckham. Coming brixtonwards saturday evening or you could drop this way if you wan to pick them up.

Anyone got an external BB removal tool I could borrow please? Preferably south west area. It's a GXP one if thats different. Thanks

I've got one in Shepherds Bush...

i've got one - putney

So two replies for a obscure bike tool within 12 hours but noone has a plane? We're all too posh on this forum.

This type of plane for those who passed my request by with a mear "I ain't in no flying club"

Don't make me go and buy one.

I keep meaning to buy one- you get one, then report back on if it is any good.

I need a 2mm torx driver/allen to change up my i-lock headset. I purchased a T6 which is slightly too large. Can have it if you help me. Loc: SW11 Battersea.

Anyone got an external BB removal tool I could borrow please? Preferably south west area. It's a GXP one if thats different. Thanks

I've got one Battersea.

benjam got one allen which you can have for free as its loose but based in angel.

Hello... I'm after a Miche BB tool for an evening if anyone has one?
Have the right tools for the above Campag one if anyone needs em... E3 based.
Cheers,
Chris.

i think i've got one chris, if no one else offers you could meet me on your way past my work (if you're going along old st) tomorrow morning?