I finally got my set of SKS P35s on friday they are a bit of a mission to get on. Saw a couple of videos on youtube, and people end up having to cut and file the metal spokes, use alternative washers.
@andytk DId you have to do anything in addition to the instructions of source extra bits?
This is the 2nd time I've fitted chromoplastics to a bike and they've been a nightmare both times.
I didn't have any problems with the rear, for the front, I did need to file out the bit that attaches to top of the fork, the bolts for my break were too big, didn't take much and it fits fine now.
I attached the metal stays to the front and back with P-clips, then cut them down with a set of bolt croppers before fitting some spare plastic caps I had (I still don't understand what the black things that come with them are meant for)
This is the 2nd time I've fitted chromoplastics to a bike and they've been a nightmare both times.
I didn't have any problems with the rear, for the front, I did need to file out the bit that attaches to top of the fork, the bolts for my break were too big, didn't take much and it fits fine now.
I attached the metal stays to the front and back with P-clips, then cut them down with a set of bolt croppers before fitting some spare plastic caps I had (I still don't understand what the black things that come with them are meant for)
I can take a few pictures later if you need.