What is my XYZ worth? How much is THIS worth? Value my...

For the mountain bikers amongst you, how much would a 2008 GT avalanche 1.0 be worth?

Depends of components and the general look of the bike.
Does it look in good condition?

cost about 500-600 new so maybe half that or less?

This is the wrong place, Classifieds...

Does anyone have any idea how much a 2011 Fuji track classic frame and forks with a few scratches might be worth? (I have no idea why that quotes there and now I can't edit it out, the perils of forums on a phone)

150-200

I've got a Syncros Bottom Bracket - which I think is a Pro Series. It has hardly a mark on it - which leads me to believe it has been very gently used.

It has Italian cups on it as they are 36mm and 24tpi - alloy lock rings are both red.
It has a Titanium axle - which is 108mm.
There are 61903 bearings on it - 7mm - as opposed to the 10mm bearing used on the Hardcore BB.

It appears to have an ISO taper in the axle - not JIS.

Any idea what it might sell for? It's of little use to me - but may appeal to you guys.

Thanks in advance.

Hi guys,

My knowledge on bicycles is VERY low, yet I have a road-bike and I'm thinking of selling it since the winter-season is coming up and I'm not sure if I'll be using it next season.
I bought it a year ago and I dont have a clue how old it is and how long it has been used but my guess is that it's not older than 6-7-ish years.

It's an alu CUBE frame 58cm (wouldnt know the exact model) and fork.
Most of the stuff on it is Shimano 105 exept for the hubs, they are Ultegra and the rear one is only 2 weeks old.
Bars and stem are Ritchey.
Prologo Scratch Pro Saddle
Triple chain ring: 52, 42, 30
9-speed I think its 12-25

I think its in pretty good shape since it only got a few users-scratches here and there but they are hardly noticable. On the pictures it might seem worse since I didnt clean the bike before I took them.

I would like to know how much this bike would raise me and if its even worth selling.
If there is more info needed please ask and I'll try to figure it out.

Thanks in advance :)
[B][/B]

5 Attachments

mmmm brushed alloy frames are delicious...

I quite want this: http://www.lfgss.com/thread73395.html

What is a reasonable amount to offer?

I've got a Syncros Bottom Bracket - which I think is a Pro Series. It has hardly a mark on it - which leads me to believe it has been very gently used.

It has Italian cups on it as they are 36mm and 24tpi - alloy lock rings are both red.
It has a Titanium axle - which is 108mm.
There are 61903 bearings on it - 7mm - as opposed to the 10mm bearing used on the Hardcore BB.

It appears to have an ISO taper in the axle - not JIS.

Any idea what it might sell for? It's of little use to me - but may appeal to you guys.

Thanks in advance.

a Phill Wood Ti cost £110 (aprox) a Royce Ti cost £115 (aprox)
with a Hope, Christ King and Campag upper model been close to £100, more or less

I will say you could sell that for around £75-85
but that is just my guess

Hi guys,

My knowledge on bicycles is VERY low, yet I have a road-bike and I'm thinking of selling it since the winter-season is coming up and I'm not sure if I'll be using it next season.
I bought it a year ago and I dont have a clue how old it is and how long it has been used but my guess is that it's not older than 6-7-ish years.

It's an alu CUBE frame 58cm (wouldnt know the exact model) and fork.
Most of the stuff on it is Shimano 105 exept for the hubs, they are Ultegra and the rear one is only 2 weeks old.
Bars and stem are Ritchey.
Prologo Scratch Pro Saddle
Triple chain ring: 52, 42, 30
9-speed I think its 12-25

I think its in pretty good shape since it only got a few users-scratches here and there but they are hardly noticable. On the pictures it might seem worse since I didnt clean the bike before I took them.

I would like to know how much this bike would raise me and if its even worth selling.
If there is more info needed please ask and I'll try to figure it out.

Thanks in advance :)

group could go for £110-£130
wheels for £100
frame for £50-£70
rest for another £50 (maybe a bit more)

all this if you decide to sell separate

I quite want this: http://www.lfgss.com/thread73395.html

What is a reasonable amount to offer?

between £400 and £450, I will say, but just my guess

How much do you reckon this Holdsworth frame and forks are worth? Completely messed up my measurements and I'm sure it's too small.

The photos show the generalcondition but they don't show:

2 small dings in the seat tube - they are about 2-3mm across and probably less than 1mm deep.

1 half of the old kanckered bottom bracket that I'm having issues with removing.

It's stamped on the bottom of the frame and the forks: 66382

Holdsworth?

But made from some italian steel I've never heard of - Tubi Oria 9506

Plain lugs on the frame:

And on the fork:

It came with a Tange Headset and a Cinelli stem and bars. Thanks for help.

£50-£60

Thanks Rik.

If I were you I'd contact HIlarystone or someone similar to ask more about it. I don't think it's a Holdsworth with that kind of steel!

Is that a Tannoy Devon or Cheviot on the left of the picture? I've got a set of 1974 Devon myself and love them to death.

If I were you I'd contact HIlarystone or someone similar to ask more about it. I don't think it's a Holdsworth with that kind of steel!
Yeah, I can't figure that out either.

Thanks alot RIk :)

Not just any bar tape. Sugino 75 bar tape. What's it worth?

Whats the frame + fork + seatpost worth? I got it 3 months ago, still in good condition - can't find out much on the manufacturer though.

around £200 give or take, IMHO

Any Italians around who might know?

is that bike italian???

Unless it's just an Italian photographer.

http://www.flickr.com/photos/rmclic/2594969481/in/photostream/

This is all I've ever managed to dig up on it (by the simplest of simple google searches) http://www.cykelhobby.com/piollini2.html

How much do you think a pair of Reynolds DV46T wheels are worth?

Apparently it's still a shop in Trieste. You could email them.

hey guys, i got this frame for a project but i don't have the time really. it's a german Kothke from late 60's i think. it's got nervex pro lugs and it was chromed before the sandblast (still has some chromed bits left). fork is a road Colner still chromed underneath and headset is campagnolo.
how much you guys think it's worth?!