You are reading a single comment by @Robbiebee and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Robbiebee
Chas Hill was a South London frame builder and was based inthe Old Kent Road, which can be made out on the head badge.
The frame dates back to the 1940/50’s and has the original paint work and needs a respray or powder coating. The seat tube is 51cm 20inches from centre to top and the top tube is 52cm 20.5 inches from centre to centre. It has mudguard eyes and will take either 27 inch or 700c wheels, the rear end is spaced out at 110mm and the front at 100mm. The front forks are drilled for a brake. Check out the lugs; the narrow forks and the fork crown detail
I am after £100 for it. I am based in North Yorks and I can send it using Parcelforce for £16.00 using the 48 hour service or I will pack it up and you can arrange your own
3 Attachments