You can still see the bearing outer races and seal even when the axle and end caps are in place. The axle itself should be about 88mm long, i.e. projecting outside the bearings by about 10mm each side, and the end caps slip over it to provide the 100mm x 9mm dropout mounting and QR skewer bore. If you can, take some pix of what you have just to make sure my axle will fit
You can still see the bearing outer races and seal even when the axle and end caps are in place. The axle itself should be about 88mm long, i.e. projecting outside the bearings by about 10mm each side, and the end caps slip over it to provide the 100mm x 9mm dropout mounting and QR skewer bore. If you can, take some pix of what you have just to make sure my axle will fit