That could be tricky for me- they are disc only, and I'm not sure where I would get another pair from.
I am making an assumption here, but if I were to wander into the OKR Halfords and ask for a pair I think there might be a bit of confusion.
I*ve installed a few integrated headsets using the wood+hammer method. Sometimes you need to ride the bike, loosen + retighten, then look at the lower fork/headtube gap to see if everything looks straight. If it is'nt I suppose it could creak, and would almost certainly reduce the lifespan of your headset. But I doubt anything banjo'd just yet.
Whip the fork off and give it a little more 'hammer'.
I*ve installed a few integrated headsets using the wood+hammer method. Sometimes you need to ride the bike, loosen + retighten, then look at the lower fork/headtube gap to see if everything looks straight. If it is'nt I suppose it could creak, and would almost certainly reduce the lifespan of your headset. But I doubt anything banjo'd just yet.
Whip the fork off and give it a little more 'hammer'.