-
• #2
Some more :
Aluminium fork, new, bought off the forum ,some scratches. 1 inch, no thread on very long steerer that is 320mm long £30
Front Wheel
Campag hub with skewer. Rigida grey rim, the spokes are not stainless because they have rust spots on them. This wheel has never been used so I can't commect on its trueness but looks okay. Wear on the braking surface £20
Sanyo dynamo.
This hasn't been used for about 20 years, fits behind the bottom bracket to roll on the rear wheel. Donation to lfgss.Rear Wheel
Campag hub, stainless spokes, Mavis MA2 rim. This was bought on the forum and never used. The axle is solid and has not in good condition, the thread is gone in the area it would sit in the dropouts. Spins nicely. £20
-
• #3
How suitable is that rear wheel for a singlespeed set-up?
-
• #4
There are far better people around here to answer this -
The rear was designed to have an old style cassette to screw on. It does not have provison for a lock ring, so it makes it dodgy stopping if it is a fixed.
However a screw on single speed freewheel should be no problem, it normally has a 5/6/7 speed freewheel on it any way
-
• #5
Hey, whats are the hub and axle lengths? cheers
-
• #6
(on both wheels!)
-
• #7
Would you take a fiver for the black rattle canned forks?
-
• #8
Fixed cheese - £5 is not enough, they are the best fit with the europa, might as well keep them.
Axle lengths answered on the next trip to the garage.
-
• #9
Fair dinkum.
-
• #10
Dibs Black rattlecan, 1 inch threaded. steerer 175mm, thread 32mm used. £10
Will PM you
Raleigh Europa Frame, forks, dynamo, wheels
for starters :
Releigh Europa frame. Well used, paint tired. 126 rear spacing, English BB ( not Raleigh ) comes with 25.4mm seat post. Tubing is 20 -30 making it a sturdy beast. Horizontal drop outs, could combine with some other parts for a cheap anti thief bike. Centre BB to centre top tube is 53cm. bought off the forum, back to the forum £35
Forks, loads,
Chrome fork, bought to use with a brake disk. New, chrome, 1 and 1/8th, steerer 200mm long, 700c fits easily, see photo £15
Sold as 531, I can't tell, but does have cantilevers and is new. 1 inch threaded, steerer 206mm, thread 52mm Marks on paint, scratched. £20
Black rattlecan, 1 inch threaded. steerer 175mm, thread 32mm used. £10
more to follow.
Payment by paypal gift or bank transfer. Postage is no problem, forks £8, wheels and frame £14, or collection from SE3
dibs swiftly followed by pm and payment.
Payment shows commitment, please do not dib on behalf of some one else.