For Sale: 2 unusual frames+ mafac cantis, TA, bits and bobs

All bits are in sunny Scotland so postage is probably necessary.

1. 1950s handlebar bottle cages. No fittings and need cleaned up - 18pounds SOLD pen.pay.
   
2. TA cranks, 170mm, with a 48 tooth chainring - needs cleaned up - 20 pounds SOLDpen.pay
   
3. RX100 triple gearset, 7spd + triple crankset 170mm - 20 pounds SOLD pen.payment
   ***4. RX100 dual pivot brakes - 15 pounds SOLD
   
4. Mafac cantilever brakeset with levers. - 30 pounds SOLD pend. payment
   
   

PLUS TWO UNUSUAL FRAMES.

1. [B][U]VUTUS ALUMINIUM WITH WISHBONE REAR STAY***
   seat=57cm centre to top/ top tube= 56cm centre to centre
   will include a 25mm seat post, takes standard stem and BB - 65 pounds

2. LO PRO FRAME in Reynolds 531, with integrated stem, canti brakes, wishbone stay, sloping top tube
   seat=56cm centre to top/ top tube 57.5cm centre to centre. - 140 pounds SOLD pend. pay.

PHOTOS HERE : http://www.flickr.com/photos/49451309@N06/

Does the Vitus frame make any unusual creaking noises?

not at all - this one is fine

how much is postage on the vitus?

is this for 700c rims?

that Swinnerton is bonkers awesome and fookin scary all at once! just been trying to work out how the front cantis would work, I guess aero levers wouldn't fit, you'd need top routing ones with a hanger on the headset?

With the mafacs, I'd try and turn it into a lo-pro cyclocross - the first?! - good luck with the sale, v. reasonable prices and am tempted

Could you do the ta cranks for £20 posted?

Like that Vitus tempting, what threading is it?

Both frames are for 700c wheels. vitus uses english threading. postage is at cost so about 10 pounds for the frame and 5 pounds for other bits.

Can I dibs the bottle cages?
I'll sort the paypal when you pm me.... £20 posted?

I'm on holiday at the moment, and the time is a bit different, but I will do it ASAP ;0)

Those Vitus 787 Futurals seem to be appearing on a more regular basis these days and £65 is a very good price for a very light frame. Others may have different stories but I used one for hilly timetrials back in t'day and it never creaked or failed. G'luck with the sale Michael

I suspect that the lo pro had cantilevers as at the time it was built they were one of the few ( only ) reliable brakes available .

Here is the "Swinnerton" built up:

Hi there, Can I have the RX100 gearset and the bottle cages if Stedlocks doesn't come through. Will PM you now re. payment, etc. Cheers, Geoffrey