I own an LX3 intending to have something that can do a bit of manual controls. I dont have any money to go down the film route right now so I think I will read the thread on digital..
Put it in aperture priority mode, and set the aperture to f3.6/f4, and adjust the ISO to whatever the conditions are: 100 - daylight, 400 - dusk, 800 - night, etc.
Do you have a RAW converter? If so, you'll get the best from shooting in RAW then playing about with the files - which you'll have to do, otherwise the files will be a bit flat. Or just stick it in JPEG.
Put it in aperture priority mode, and set the aperture to f3.6/f4, and adjust the ISO to whatever the conditions are: 100 - daylight, 400 - dusk, 800 - night, etc.
Do you have a RAW converter? If so, you'll get the best from shooting in RAW then playing about with the files - which you'll have to do, otherwise the files will be a bit flat. Or just stick it in JPEG.
Raw Developer works well with LX3 RAW files.