You are reading a single comment by @Robertoegg and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Robertoegg
Hi Guys,
After a stroll through your collective knowledge please.
I had noticed a bit more noise coming from down below recently and thought I heard a crack of sorts this morning. Looked at the chain as I've had once partially break on me before, but that was fine, then noticed that the ring bolts were pretty much all loose and one had actually fallen out completely. What do you think is the damage done to my chain ring/chain etc, or should I be fine just bolting everything up again? Do I need a new ring and chain? Does that necessitate a new rear cog? etc
My concern is the chain is now very slack but I haven't investigated whether that is due to the loss of shape of the ring(unlikely?) or just the fact that the ring may be sitting 'further back' as it's loose.
I'm on a stock Fuji 2010 classic with no mods to the drive.
Thanks,
Rob
(had a search through but couldn't immediately find anything on this specific issue)