Wanted: Peugeot carbolite seat post and stem

Hey guys, I have just got hold of a very nice Peugeot carbolite frame, which doesnt have seatpost and headset.
I had a look around and it seems like its not that easy to get hold of one because of size! (according to sheldonbrown.com it need a 23.4 mm seat post)

I was wondering if anyone here has one or could guide me to get hold of one.

They both come up on ebay every now and then, but they're expensive.

What I did for my Pug seatpost was get a secondhand 22.2mm BMX seatpost and make a shim from 0.9mm brass sheet. Cost me less than a tenner in total, I think.

Cheers Lae, I will look after a BMX one too..is it wasy to get the shim of that size though?

_

I have a complete Peugeot carbolite bike if you want £20 collected (Near Harrow) or I'll post the seatpin and Headset for £20.Steel wheels so not a top end model,tyres shot from standing around for a long while.but nice looking ali seatpin and chrome headset.

I may be able to help. Have the parts to an '82 Peugeot PH 12.

MIG, what model is yours?

Not sure about the exact model, But it should be from the mid-80s.

http://flic.kr/p/9Rddfk

'84-88 based on the decal scheme. Looks like a P-10 Model frame and the decal on the dt looks suspiciously like a Reynolds 531. You sure it's a Carbo103? I'll check my parts as soon as I get home.

If you have a chance, send me the serial number on the underside of of the crankshaft and I can tell you more. Thanks for sharing!

Thanks for info! sounds like you know alot about PUs ;)
I am almost sure that the frame is carbolite, I will double check it tonight and will post the serial number too.
Cheers

Peugeot did move the tubing decal for some of these years (I just bought an '87 carbolite frame). At any rate, if you do have a carbo103 and need a seat post... I have one I'm willing to sell.

You can get new seat post from http://www.btwincycle.com/EN/l330-basic-diam-23-4-25-27-2-33279258/

Also looking for part for my Peugeot PH12