6000V sealed cartridge hub (26x12x8)

Posted on Sun 29th, May 2011

• #1

xroads

Anybody know where I can find replacement cartridge bearings for my on-one hub.
Dimensions are 26mmx12mm dia, 8mm width (marked 6000V PNB).
Tried online searches, but no joy so far.
• #2

andy.w

http://www.lfgss.com/thread3579.html

I think the on one hubs are the same as these. Check your measurements.
• #3

xroads

I measure the dimension using a digital caliper on the axle stub. Maybe I measured the wrong bit, eg stop flange after bore seat? will double-check. Cheers. A standard 6000RS bearing would be so much easier to find!
• #4

xroads

I stand corrected. Its a 10mm internal bore. Was measuring the stub flange on the axle rather than its seat. Cheers Andy
• #5

retrodicorsa

Whatever size you want you can probably find it here: http://stores.ebay.co.uk/PT-AND-BEARINGS

Post a reply
- Bold
- Italics
- Link
- Image
- List
- Quote
- code
- Preview
Formatting Help

Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.

Tips:

Create headers by underlining text with ==== or ----

To *italicise* text put one asterisk each side of the word

To **bold** text put two asterisks each side of the word

Embed images by entering:
![](https://www.google.co.uk/images/srpr/logo4w.png)
That's the hard one: exclamation, square brackets and then the URL to the image in brackets.

* Create lists by starting lines with asterisks

1. Create numbered lists by starting lines with a number and a dot

> Quote text by starting lines with >

Mention another user by @username

For syntax highlighting, surround the code block with three backticks:

```
Your code goes here
```
Just like Github, a blank line must precede a code block.

If you upload more than 5 files we will display all attachments as thumbnails.

For a full reference visit the Markdown syntax.