You are reading a single comment by @Scrafton and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Scrafton
Both Njs Certified.
46tooth very good condition 144bcd 1/8th -*** £35***
53tooth 's-cubic' model (Titanium coated) 144bcd 1/8th Good Condition - **£23
*Mavic 3G wheelset - Very Very good condition.
***Both 700c, With all Mavic decals still intact.
Both hubs are still very smooth. Come with continental 'sprinter' tubulars with plenty of life left in them. The Rear has a well used **sachs 7 spd **screw on block
They come without skewers.
Rear: **£210 (including postage)
Front: £200 (including postage)
*Goldinger Small brake lever.***
Right hand. Some scratches but in full working order.
to fit 25.4mm bars (standard) but comes with 22.2mm shim.
**£8 (including postage)
Cinelli Handlebar/stem set.
**1A 90mm stem and 40cm Criterium bar.
Both in very good condition. bar has some tape residue.
Do dings, dents or serious scratches. **
£47.50 (for both including postage)
Or £25 each (inc postage)
*New Token TK140 Lockring *
Details in pic - never installed (doesn't fit campy :( Duh!)
£3.50 (including postage)
*Dura ace 7600 rear track hub, 32h
***The hubs in good condition, However there it's running with the incorrect axle.
It does still spin better than most hubs but it's not perfect. The bearings are completely fine. axle is sole problem.
The hub shell is in brilliant condition and hasn't seen much wear- only laced once.
ask any questions about this.
It comes with a virtually new NJS DA track lockring and a 16t track cog.
£35 (inc postage)
**
Also Have loads of Bladed spokes - PM me :)
**