Hand-built Mavic 501 Hubs (Sealed Bearings), Both QR, 100/126mm spaced, bearings buttery smooth, and have no play at all.
Front is radially laced (28h), to a Mavic CD2 650c Sprint Rim, Will include 'aged' but useable tub (Holds good pressure)
Virtually no brake wear (If any!)
Rear is built 2/3-Cross (32h), to a Mavic CD2 27" Sprint Rim, Again, Will include a 'aged' but useable tub (Holds good pressure). Also fitted with a 6-Speed Suntour close ration freewheels, however, this can be removed if not required.
Slightly more brake wear than the front, however, the rims still has 1000's of miles left in it.
Unfortunately, I do not have the original QR Skewers, however, I can find a pair to get you rollin'!
Based in Brighton, and in an ideal world, you can come meet me in the pub after work and pick them up, but can post at cost.
Condor provisionally gone.....
Hoever;
Mavic Lo-Pro Wheelset (700c/650c)
Hand-built Mavic 501 Hubs (Sealed Bearings), Both QR, 100/126mm spaced, bearings buttery smooth, and have no play at all.
Front is radially laced (28h), to a Mavic CD2 650c Sprint Rim, Will include 'aged' but useable tub (Holds good pressure)
Virtually no brake wear (If any!)
Rear is built 2/3-Cross (32h), to a Mavic CD2 27" Sprint Rim, Again, Will include a 'aged' but useable tub (Holds good pressure). Also fitted with a 6-Speed Suntour close ration freewheels, however, this can be removed if not required.
Slightly more brake wear than the front, however, the rims still has 1000's of miles left in it.
Unfortunately, I do not have the original QR Skewers, however, I can find a pair to get you rollin'!
Based in Brighton, and in an ideal world, you can come meet me in the pub after work and pick them up, but can post at cost.