Shimano 105 5700 measurements?

I am going to building a wheel, around a 36hole 105 5700 rear hub.

I am currently having no luck trying to find the hub flange dimensions and centre to right and left dimensions - so i can determine the spoke length.

(i am using this hub as the 5600 (which i can find dimensions for) hub is £10 more - and this is for a every single day of the winter commute so cheap and durable is no 1 priority).

Anyone know them? are they the same as the 5600 (most versions of the 105 rear hub seem to be)?

Thanks, chris

Shimano and Campy have always kept the same hub dimensions during the years.
Tell me which rim you're building onto, and I'll tell you the spoke lenght :)

Thanks man,
i assumed as much. its to an mavic MA3 (36h) that i have in the garage from an old bike i took apart. i measured...one thing, people told me to "round up" the spoke length.

so, for a 292.4 spoke measurement do i order a 294 (closest length available), i hope so coz thats what ive done! (theoretical measurement, i cant remember the exact lengths off top o head).

ha, rookie wheel builder here!

ta, chris

On 3x: 294 non-drive, 292 drive side, with 12mm nipples

Tearing my hair out here, trying to find the rear 5700 hub dimensions. I suspect they're not the same as previous models, because Shimano's own tech doc%20Hub%20Specs.pdf) states that 5500 and 5600 were different. But of course it's a model year out of date.

Anyone know, or work in a bike shop and can quickly measure one for me?

Here you go, I'm busy building some:
Front: Flange diameter: 38.0mm
Flange separation:68mm so centre to flange is 34mm

Back:
Flange diameter: non drive:44.6mm
drive:same
LN to flange drive:47mm so centre to fl is 65-47=18mm
LN to flange non drive:29mm so centre to fl is 65-29=36mm
OLN:130mm
flange sep is 53.5 so checking back:18+36=54mm so close enough!
Good luck,
Scherrit.

Brilliant - thank you very much.