You are reading a single comment by @coventry_eagle and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@coventry_eagle
Willing to post at cost but would prefer collected New Cross/Leicester Sq./Covent Garden/ NE or SE polo. DIBS then PM, or just PM directly, DIBS taken in order of PM :)
1. Cinelli Pista bars - GBP100 O.N.O
Slight scratches around clamp area and some deeper ones. Other than that the bars are excellent, a good evening of polishing should take the marks out. Price reflects I don't really want to sell this but if someone meets the above price then it is yours.
Clamp area:
Left drop:
Right drop:
Back of clamp:
Back of left 'flat':
3. Thomson Elite Layback, 27.2 x 330mm, Black - GBP45 - DIBS furious tiles
Installed on my polo bike, swapped saddle twice, adjusted height once, so it is 9/10 if not 10/10.
4. Campagnolo Omega Strada Hardox Tubular 36H rims only, splitting and keeping the hubs, GBP60 O.N.O
The tubular rims and tubs are surplus to requirement. Never seen a brake and as good as NOS. Price are for rims only, tubs are thrown in FREE :) Better pics will be uploaded later.
5. Cinelli 1A stem, 100mm, 26.0mm scratched where stem was previously inserted - GBP20
Photos will be uploaded later.
6. MKS pedals GR-9 pedals - GBP18 - DIBS mmccarthy
Firm favourite with the touring crowd, wide platforms and one piece body+cage. Takes single straps and fits the below MKS clips. Bought, removed from the package (cardboard which it's strapped to) and never used. Small scratches from from storage.
7. Bontranger Earl 70mm 5/10? degree rise/drop Oversized stem + bar combo - GBP18 - DIBS nabz
Anodizing worn where headset spacer meets stem and little scratches here and there. Threads are fine on all screws. Will throw in the B One chopped risers (40cm +/-).
8. Miche fluted seatpost - GBP10
Rail clamps to bottom of post: 20cm, Tube portion (bottom till before black clamp part): 16cm, Minimum insertion to bottom of post: 5cm, Condition: Insertion/Removal marks from bottom of post to till the lower portion of the filled flutes/grooves, nothing a good polish wont take out. Miche logo on the top of the post on the front and 26.8 on the rear, crappy camera means that both doesnt show up.
9. DMR chaintugs - GBP6 - DIBS Stonehedge
Bought for the new build from CRC, but decided it had to go to raise $$$.