Bike porn

this is porn to me, some may disagree

certainly,
pr0n standards have been seriously reduced
recently

Yes, should have rewired the skirt. Maybe Farrow & Ball with Parquet n'est-ce pas?

Almost forgot the fixie alien.

Back on track? I'm basing the colour scheme for my "Tossini" restoration on this badboy!

eh wise guy eh?

yes, very wise

Back on track? I'm basing the colour scheme for my "Tossini" restoration on this badboy!

You're even based on the same background for the photo. That's like fuck yeah.

FINALLY!!!

Thats the only thing worthy of this thread for sometime, certainly this page.

STOP POSTING YOUR OWN BIKES. There are rules; otherwise I'd be all over this sheeeet!

fuck me, WANT! ^

you have my OKAY on that muchacho malo respray

A lot of 'meh' recently. Nothing different or really exceptional. There should be an approval system before a bike is allowed to be posted in here.

me wants dat crankzet

full MAVIC group? ^

So it seems.
Can be sure on the SP.

what rim on the front of that?

and this...

looks like 90's mavic sticker. 4CD ?

certainly,
pr0n standards have been seriously reduced
recently

What's that holding it on the wall?

^^^^^^^^^^^^^^^^

this is porn to me, some may disagree

cycloc

reposting your own (quite shitty) post from last page is surely bringing you some distinction along the lines of common forumengers

why you gotta be such a dbag?

Those Halo hubs are a bit gash. The axle can only be replaced with a Halo item. So if you want to run the hubs in a conversion the spacing is too narrow and you can't buy a wider axle to suit the frame. Also the bearings are shite. Mine are fucked already after 4months of riding.

i disagree, i got a halo aerowarrior rear double fixed wheel for my beater, works like a charm, smooth, sealed bearings, decent length axle, with a large amount of threads for the lockring....

I used Halo hubs (Aerotrack wheelset) for a year in all weathers (on and off road) and didn't have a bit of trouble.

what rim on the front of that?

and this...

looks like 90's mavic sticker. 4CD ?

MAY (probably) be a ceramic Open Pro (Mavic). If the blue reflection on the sticker is actually silver...

i disagree, i got a halo aerowarrior rear double fixed wheel for my beater, works like a charm, smooth, sealed bearings, decent length axle, with a large amount of threads for the lockring....

Decent axle length, for your particular frame. If I were to put the wheel into a 130mm spaced dropout then I'd have to squeeze the dropouts in to make it fit. You can't get 130mm spaced axles from Halo which is a bag of shite imo. Squeezing the dropouts inor out puts unnecessary stress on the frame which can cause the welds to crack.

It's my first experience with a Halo hub and it's not a good gone. I've had friends strip lockring threads when everything had been installed as it should be. The hubs were replaced pretty quick which is good.

You're even based on the same background for the photo. That's like fuck yeah.

i hope you going to give that chain some tight love

and this...

looks like 90's mavic sticker. 4CD ?

2a bike is Mavic MA-40.