Newcastle Classifieds

Looks good. What crank set is that?

Dunno rpm maybe. Had it lying around for a while

Looking for bmx pedals, 9/16" (standard) thread and freewheel (16t or less).

got a couple pairs of risers for sale, and some straight steel forks if anyones interested, just message me or whatever.....

what size is the steer tube on the forks, what length are ya bars??

1 1/8 forks
bars are 55cm and 58cm

does any one have a 38t chain ring BCD
104mm ??

Saddle, Bars and stem for sale here
http://www.lfgss.com/thread58408.html

does any one have a 38t chain ring BCD
104mm ??

Got Miche 36t if that's any use to ya....
Pretty sure its 104bcd

1 Attachment

Chrome forks for 700c wheel, 1" threaded, 160mm steerer, straight blades, recessed brake nut fitting. Very few miles on these. They're the ones I used to have on my Viking. They look pretty much brand new and are spanking gorgeous. Will improve the looks and handling of your bike by 100%, guaranteed* and will make you 1000% more attractive to the opposite sex, guaranteed** £25. I Can deliver to polo or Recyke-y'bike.

• Unless your bike is a real shed and nothing would improve it!
  ** Unless you're already gorgeous and nothing would improve you ;b
  
  

[no actual guarantees offered or implied]

3 Attachments

Evening all.

Any interest in an Italian road frame badged up by Hardisty's (formerly) of Newcastle?
It's made by Saba, as the seat stays & fork crown attest. Late 70's/early 80's I'd guess.

st 53.5 ctc / 55 ctt
tt 55 ctc

Columbus tubing, no clue what type other than it needing a 26.8 seatpost. Nice lugs including a full set of playing card motifs on the inside of the forks.
Campag drop-outs.
Italian threading.

Includes a smooth Shimano bb (haven't removed it, so no idea what type) & Tange Seiki headset.

The paint has been touched up in a few places, there's a smattering of chips & dings and it's flaking slightly around the bottom bracket. Nothing structural though.

SOLD

Hello Chaps.
I have a Dawes Response road bike for sale. Bought it before christmas with the intention of spending a bit of money on and then using but time has put a stop to my plan. Uni has taken over my life and if I do get a chance to get out on a bike I'll always want to take the Ward so this needs to go.

After measuring the seat post it appeared to come out as a 53cm c-t but it actually feels a similar size to my Ward which is a 48/49cm so i'm guessing thats down to bb heights etc. Regardless it will suit those shorter in stature.

The bike has Shimano Exage groupset with downtube shifters. The headset could do with a bit of a tinker as its a bit stiff. I bought some ritchey bar tape to go on it which I didn't get round to putting on. I also replaced the brake cables but didn't have cable ends or decent cable cutters so they've been left to cut to size. The only other thing to note is the rear wheel which has a campag rim logo. I'm presuming that this was an upgrade at some point in its life.

Anyhoo, I'll offer it to locals first and then pass it over to the main forum if theres no interest.

Price: £100

Anyone got a turbo trainer/rollers I could borrow for Saturday night?

Quiet night in with some candles and a set of rollers eh !? Kinky

I have a friend who is selling a tall person's Dave Yates roadbike.. Full reynolds tubing, Some bits of dura-ace or Ultrgra transmission, down tube shifters. Think its about a 61 so you'd need to be 6foot plus i'd guess. If anyone wants me to get more info and pics I can.

^ aye possibly, depending on pics/price etc - I'll drop you a PM.

Wanted: someone in newcastle to show me how use dreamweaver. . .

to do what?

to do what?

Build a webshite. Also just something I want to learn and as with all these things, I've always found that once you've been shown the basics by someone, it becomes relatively easy but the initial steps take forever if you're just reading shite tutorials online.

Only know the basics myself but if its a fairly straight forward site i can show you how to setup home page/about/contact pages etc and how to link. if you have thought of a layout as well could show you how to slice it up in photoshop and import to dreamweaver, might get you started

anyone got a 19T cog??

will happily trade, i have 17T and 20T

i need a MTB chainring, 4 bolt 104bcd, around 32tooth maybe less. for singlespeed.

anyone got this that i need? or know of anywhere i can get one cheap?

i need a MTB chainring, 4 bolt 104bcd, around 32tooth maybe less. for singlespeed.

anyone got this that i need? or know of anywhere i can get one cheap?

ebay, with bashguard and chainring for £23 inc postage

Yeh I was looking for something cheaper. Got a link?

cheaper than 23 quid?!

not gonna happen

look for a second hand one, which is what you asked in the first place