-
• #52
For some reason, 'flange geometry' made me smirk like a schoolboy.
-
• #53
Thanks for all the responses.
I think I'm going to go with Tune hubs on KinLin rims as Smallfurry suggested. I really like Tune components so might put in a big order and get matching stem and seatpost. Seems a shame not to really. I also like the exclusivity of using these components.
Win :)I picked my Tune hubs from here
http://www.hibike.de/shop/setlang/l1/language.html?langID=2
(they're lovely)Rim are availible on this US site, but I've seen Kinlin rims on UK sites too.
http://fairwheelbikes.com/kinlin-xr200-clincher-rim-p-1214.htmla spoke count of at least 24f 28r is recomended for riders between 55 and 85 Kg, for those rims. For a more classic look, I'd just go 28F, 28R. 2x for both. But whatever you do bear in mind that the front hub doesnt like radial lacing above a certain hole count (I think 24 is the upper limit, but check if you want radial)
All the best with it.
-
• #54
Good choice. I had a pair of handbuilt road wheels with Tune hubs, 28 holes laced 2x to a pair of Mavic Open Pros. They were fantastic, light but pretty robust too. As SF has already said, for supposed weightweenie hubs Tune ones are very reliable.
-
• #55
Good choice.
Not to add doubt, but aren't the KinLin rims the same as the IRD's?
-
• #56
The Mavic Open Pro rim is fairly light (at approx 430 grams) and readily available, although I hear grumbles about recently quality levels, and you'd be hard pressed to find a clincher rim that is much lighter than that.
If you'd rather avoid poor quality Open Pros buy them NOS from campyoldy.co.uk, Nigel has various models for £70 or £75 a pair.
-
• #57
Good choice.
Not to add doubt, but aren't the KinLin rims the same as the IRD's?
Yes. IRD's are rebranded Kinlins as are some Haro, and quite a few others.
-
• #58
Thanks for all the responses.
I think I'm going to go with Tune hubs on KinLin rims as Smallfurry suggested. I really like Tune components so might put in a big order and get matching stem and seatpost. Seems a shame not to really. I also like the exclusivity of using these components.
These are the UK suppliers for KinLin:
Product at Fine-adc | UK, Irish Isles and Europe
A 16 Bridge Road, Edinburgh, EH13 0LQ, UK.
T +44 (0) 131 441 6860
M +44 (0) 7540 131 032
You might have to be patient with getting through.
-
• #59
anyone know about the halo aerorage wheels??
-
• #60
Look solid enough, Heavy though. A planet-x model B wheelset is lighter and cheaper.
http://www.planet-x-bikes.co.uk/i/q/WPPXMODELB/planet-x-model-b-wheelsetIn fact PX have the Fulcrum R3 and the Mavic Cosmic elite for around the same price (45% off)
http://www.planet-x-bikes.co.uk/i/q/WPFUR3C/fulcrum-racing-3-clincher-wheels
http://www.planet-x-bikes.co.uk/i/q/WPMACOSEL/mavic-cosmic-elite-wheelset-m10[URL="http://www.planet-x-bikes.co.uk/i/q/WPFUR3C/fulcrum-racing-3-clincher-wheels"][/URL] -
• #61
cheers dude. i only need the back, accident yesterday. looking at a free/ fixed, for training and commuting. thatss why i was asking about the areorage.
-
• #62
Ahh, though you meant road aerorage. Track sets £100 a pair. The On-one ones are pretty decent apparantly.
http://www.planet-x-bikes.co.uk/c/q/wheels/track-wheels -
• #63
I am doing the same as the OP. Excelight and Ambossio hubs were on my radar but I have seen mixed reports on the hubs and had an unforunate experience with the rims although I put that down to the wheel builder ( excessive tension on the rear driveside spokes ). Thinking of playing safe with Open Pros ( never let me down ) and Campag hubs ( this is my first Campag build ).
-
• #64
these rims are really light and not as pricey as carbon. tubeless compatible too
-
• #65
-
• #66
Lightweight Wheels?
Here you go...
Thanks for all the responses.
I think I'm going to go with Tune hubs on KinLin rims as Smallfurry suggested. I really like Tune components so might put in a big order and get matching stem and seatpost. Seems a shame not to really. I also like the exclusivity of using these components.