You are reading a single comment by @Dutch_Cheese and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Dutch_Cheese
Hi,
I'm looking for some English threaded (68 mm - BSC 1.37 x 24tpi ) cups / adapters for Shimano BB sets type BB-UN7* or BB-UN9*
Both LH and RH
Alu, steel, alu or even plastic from BB-UN5* series.
3 to 5 sets or so.
Looking for freecycle, postage cost or swap against ital. threaded cups or something else.
The LH cups or adapters are always loose / separate from the cartridge, the RH side is pressed, but can easily be taken off with a bench vice and hammer (there are also more sophisticated ways).
So, if you have old, worn, frozen, wrong length spindle or wrong threaded BB sets, but the treads are still fine, please think of me.
I have several NOS BB-UN90 going spare, but all italian threads.
I need BSC threaded BB-sets mostly.
I'm based in The Netherlands.