-
• #13802
you know too much about everything, mcdcct.
-
• #13803
Maths. How TF does that work?
-
• #13804
-
• #13805
-
• #13806
Could definitely use bullhorns and slightly less spock.
-
• #13807
There is not a single thing on that worth rescuing
-
• #13808
Anti? I fucking love that bike.
It got the wrong stuff, but still look awesomely bright.
-
• #13809
You'll love this one then Ed.
-
• #13810
-
• #13811
Could definitely use bullhorns and slightly less spock.
This bike is dope.
Would only change the pedals and cranks. Always think it looks dumb to have an expenisve plastic wheel with budget cranks.
-
• #13812
-
• #13813
That on-one is plain bizarre, it got some expensive bits yet look very cheap.
-
• #13814
I modelled this at Pret a Rouler.
That is all.
-
• #13815
^ That's Karta Healy, used to be a model
-
• #13817
^ That's Karta Healy, used to be a model
looks like he's still a model?
-
• #13818
http://www.lfgss.com/attachment.php?attachmentid=33595&d=1290457689
Ouch! My crotch hurts just from looking at this saddle.
-
• #13819
I think 24 spoke wheels should appear stationary at approx 10mph under a 50Hz strobe, per street lighting, but also at 24/25 of that speed and 23/24 of it
This is obvious bollocks. If it takes 1/50s to rotate 1/24 of a revolution, the next time it will appear stationary is when it takes 1/50s to rotate 2/24, i.e. at approx 20mph. Just thought I should clear that up.
-
• #13820
duh
-
• #13821
erm, yeah, what an epic fail!
scraps plans for "mdcc is bigger than Sheldon" T-shirt collection
-
• #13822
-
• #13823
ha, shtate of your bike adam
-
• #13824
http://www.lfgss.com/attachment.php?attachmentid=33595&d=1290457689
that rear brake is a mega fail
-
• #13825
I think 24 spoke wheels should appear stationary at approx 10mph under a 50Hz strobe, per street lighting, but also at 24/25 of that speed and 23/24 of it etc, i.e. very small speed variation will kill the effect. On a PLL drive locked to a quartz crystal, the speed variation should be very small, but on a bike the speed variation through one complete cycle of the cranks is likely to be too much to get a good effect.
That also should mean I could get my trispoke to look stationary if I film at 30fps and 48mph as long as I have enough light to get the shutter speed down to about 1/500s. A plan is emerging...