-
• #2
Any 9 speed at all please?
-
• #3
Sorry not at all sure. Don't know much about ergo levers?
-
• #4
Hi,
Sent you a p.m. about a Avanti (or the Veloce) lever.
Stuart. -
• #5
Ah, you don't have a set of both left and right?
-
• #6
Hi,
I am after some 8speed campag ergo levers. Not bothered about condition as long as they work.
I currently have on my old 531 frame levers and calipers with Colnago on. the calipers has Ernesto Colnago on and the levers has Colnago with a C on the top of the hood. Any idea what they are?
Cheers
Andrew -
• #7
Im after an 8 speed shimano, right hand only is just fine.
-
• #8
how much for the cheapest left hand inc postage?
-
• #9
Ian, I have to know, how did you end up with your own weight in left hand ergo levers!!
-
• #10
I am loosing touch with what i've got. guess i've got too much...
Ian, I have to know, how did you end up with your own weight in left hand ergo levers!!
-
• #11
hi could i have a left and right lever if complete?? avati or athena /veloce-
are these all 8 speed? cheers Carl -
• #12
as listed mate. if there were left and right they would have been listed. cheers
hi could i have a left and right lever if complete?? avati or athena /veloce-
are these all 8 speed? cheers Carl -
• #13
are there any right side levers that are working?? Cheers
-
• #14
not sure, welcome to have a look...
-
• #15
Hey CC. I need a black insert that fits behind the lever that rests against the bars for a Mirage Ergo lever....I think I'll have to take a picture.
-
• #16
I feel the same.
I assume left is FDSorry not at all sure. Don't know much about ergo levers?
-
• #17
@bigfella - You can change most 8sp levers to 9sp by replacing the rachet mechanism and springs inside. Give Mercian Cycles a call. They sell parts for ergo levers and they've been very helpful to me when I called them a while back when I refurbished my old 9sp levers. It's a fiddly job but you can do it yourself. And you can download the schematic from the Campag web site in case you get the lever apart and can't remember which order the parts go back together! ;-)
-
• #18
hi tel, just pm me por favor. Abraço e obrigado! c_c
Hey CC. I need a black insert that fits behind the lever that rests against the bars for a Mirage Ergo lever....I think I'll have to take a picture.
-
• #19
Hey mate what do you know it was there all along! (well on the floor actually) Thanks anyway always there when I need ya. Cheers
-
• #20
CC
I need a pair of 8speed levers.Doesn`t matter ifworking as long as hoods ok and shiny bits not to damaged.Prefer Record/Athena also need 1 avanti .
C -
• #21
I may be able to get a pair tomorrow, not fully sure of cost? I only have left hand only at the moment. Shall find out soon. PM m. cheers c_c
-
• #22
will take pair of campag record, athena ,veloce levers if any
-
• #23
No pairs complete I am afraid, all described in the listing. cheers c_c
-
• #24
Hi - Do you still have a working L/H veloce one available?
I'm trying to find the quickest/cheapest fix for a snapped shift lever on a 2008 model. -
• #25
Yes still got it. can bring it uptown to view. Kentish town. cheers c_c
Campagnolo Ergo Levers Misc - Brand New & Old - spares
All mainly 8-speed era.
14 x Campagnolo Avanti - left -** £12 each**
1 x Campagnolo Veloce - left -SOLD
1 Shimano - left -** £12**
An assortment of Campagnolo levers Record / Athena / Veloce / Xenon / Mirage - left or right -** £1 - £5.** (Not fully sure if these are working fully, some incomplete for spares).