BRIAN ROURKE ROAD FRAME c1996
Seat Tube (ctt): 20.5in (52cm)
Top Tube (ctc): 20.75in (52.5cm)
Rear dropout width: 130mm
Wheel size: 700C
Brake drop with 700C/Sprint wheel: 42mm
Frame Tubing: Reynolds 531C
Seatpost size: 27.2mm
Brian Rourke framesets were and some I believe are still produced in their own workshop by Paul Washington - this frame features his very distinctive and special wrap over seat stays. And has hardly been used - the kit that was taken off looked as if it had not done 100 miles... The paint is truly excellent with just a couple of small chips. This frame I think dates from the middle/late 1990s. I was very impressed by Paul Washington’s workshop when I visited about 12 years ago and his frames are really rather special. £169
TEAM BRITE MICRO LO-PRO TT FRAME Reynolds 853 c1998 built by Paul Donohue
Ex Chris Newton
Seat Tube (ctt): 44.5cm (17.5in)
Top Tube (ctc): 52cm (20.5in)
Rear dropout width: 130mm
Wheel size: 700C
Frame tubing: Reynolds 853
This frame is an ex Team Brite micro lo-pro frame that was ridden by Chris Newton around 1998 and is beautifully built from Reynolds 853 tubing. Paul Donohue’s works built all the Team Brite frames and they employed a tig welder who was truly superb - in my opinion he was just as good as the tig welders at Merlin who I had seen working back in 1994. Its a really gorgeous frame which would equate to about a conventional 21.5 in road frame and is designed for use with a long aero seatpost and aero bars of course. It comes complete as shown in the photos with its original bladed carbon fibre forks. £195
DAVE HUISH ROAD FRAME c1988/89
Seat Tube (ctt): 20.5in (52cm)
Top Tube (ctc): 20.75in (52.5cm)
Rear dropout width: 128mm
Wheel size: 700C with brake drop of 45mm
Seatpost size: 27.2mm
Frame tubing: Reynolds 531C
This is a really nice road frame built to a very high standard – I do not know anything about Dave Huish – whether he built his own frames or not but this is a very impressive frame. The paint is in generally excellent condition with only a few small marks. It will make a very easy conversion to fixed or single-speed. £125
Yes of course it was sold...
For short top tube frames take a look at:
BRIAN ROURKE ROAD FRAME c1996
Seat Tube (ctt): 20.5in (52cm)
Top Tube (ctc): 20.75in (52.5cm)
Rear dropout width: 130mm
Wheel size: 700C
Brake drop with 700C/Sprint wheel: 42mm
Frame Tubing: Reynolds 531C
Seatpost size: 27.2mm
Brian Rourke framesets were and some I believe are still produced in their own workshop by Paul Washington - this frame features his very distinctive and special wrap over seat stays. And has hardly been used - the kit that was taken off looked as if it had not done 100 miles... The paint is truly excellent with just a couple of small chips. This frame I think dates from the middle/late 1990s. I was very impressed by Paul Washington’s workshop when I visited about 12 years ago and his frames are really rather special. £169
TEAM BRITE MICRO LO-PRO TT FRAME Reynolds 853 c1998 built by Paul Donohue
Ex Chris Newton
Seat Tube (ctt): 44.5cm (17.5in)
Top Tube (ctc): 52cm (20.5in)
Rear dropout width: 130mm
Wheel size: 700C
Frame tubing: Reynolds 853
This frame is an ex Team Brite micro lo-pro frame that was ridden by Chris Newton around 1998 and is beautifully built from Reynolds 853 tubing. Paul Donohue’s works built all the Team Brite frames and they employed a tig welder who was truly superb - in my opinion he was just as good as the tig welders at Merlin who I had seen working back in 1994. Its a really gorgeous frame which would equate to about a conventional 21.5 in road frame and is designed for use with a long aero seatpost and aero bars of course. It comes complete as shown in the photos with its original bladed carbon fibre forks. £195
DAVE HUISH ROAD FRAME c1988/89
Seat Tube (ctt): 20.5in (52cm)
Top Tube (ctc): 20.75in (52.5cm)
Rear dropout width: 128mm
Wheel size: 700C with brake drop of 45mm
Seatpost size: 27.2mm
Frame tubing: Reynolds 531C
This is a really nice road frame built to a very high standard – I do not know anything about Dave Huish – whether he built his own frames or not but this is a very impressive frame. The paint is in generally excellent condition with only a few small marks. It will make a very easy conversion to fixed or single-speed. £125
regards
Hilary