You are reading a single comment by @Wicksie and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Wicksie
Cheers Kerley, glad I asked.
Anyone have suggestions of 'normal' ones that are quite set back? I'd like it fairly traditional looking.
EDIT.
This is the answer:
http://www.tokyofixedgear.com/shopexd.asp?id=649&bc=no
*These polished two bolt seat posts have a generous 30.2mm of setback, among the longest ever. This is very important for those who ride Brooks saddles which have very little fore-and-aft adjustment due to the short rails.
The VO posts are internally ovalized to reduce weight to 254gms. The adjustment is from the bottom and the two bolt design makes it easy to precisely adjust the seat angle. Also note that the head is integral with the post, not pressed on as on many modern posts. This makes them stronger and lighter. The quality and finish is second to none.
27.2mm only x 300mm. Maximum height (above the min. insert line) is about 23cm.*