-
• #2
I can help you with a Dura Ace, but only italian thread.
What do you need? -
• #3
english, sorry shud of mentioned the threading
-
• #4
That may be rare.
Saw one on the bay for a 73mm BB shell. You can use that, but you need 2 spacers 2.5mm.
USA, very expensive.
Looks like only BB-UN54 is still produced.
Good: cheap, more or less same quality as D/A
Bad: weight, axle corrodes easier.
Buy hey, it fits.http://www.chainreactioncycles.com/Models.aspx?ModelID=17473
-
• #5
they are you can get them tho, i seen one go on ebay a couple of months ago for about £20 but missed it. the guy over at njs-extort has some too but there wayy too much £££
-
• #6
I have a couple (10?) with It. thread, but I have them approx. 15 years.
That will go for the other owners as well.
If you need it quickly, get a UN54. Best choice anyway if weight doesn't matter. -
• #7
yer i might try that, if i cant get a dura ace one, cheers for your help.
must be sealed, around about 107 is ideal but will consider other length, need one quite urgently, out of london at the moment, but am willing to front postage.